Cisco Catalyst 3750 Metro Command Reference Manual page 148

flowcontrol
Table 2-5 Flow Control Settings and Local and Remote Port Flow Control Resolution
Flow Control Settings
Local Device
send off/receive on
send off/receive off
Examples This example shows how to configure the local port to not support flow control by the remote port:
Switch(config-if)# flowcontrol receive off
You can verify your settings by entering the show interfaces privileged EXEC command.
Related Commands Command
show interfaces
Catalyst 3750 Metro Switch Command Reference
2-120
Remote Device
send on/receive on
send on/receive off
send desired/receive on
send desired/receive off
send off/receive on
send off/receive off
send on/receive on
send on/receive off
send desired/receive on
send desired/receive off
send off/receive on
send off/receive off
Description
Displays the interface settings on the switch, including input and output flow
control.
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
Flow Control Resolution
Local Device
Receives only
Receives only
Receives only
Receives only
Receives only
Does not send or receive
Does not send or receive
Does not send or receive
Does not send or receive
Does not send or receive
Does not send or receive
Does not send or receive
Remote Device
Sends and receives
Sends only
Sends and receives
Sends only
Receives only
Does not send or receive
Does not send or receive
Does not send or receive
Does not send or receive
Does not send or receive
Does not send or receive
Does not send or receive
OL-9645-10