Show Ip Sla Standards - Cisco Catalyst 3750 Metro Command Reference Manual

show ip sla standards

show ip sla standards
Use the show ip sla standards command in user EXEC or privileged EXEC mode to display the Cisco
IOS IP Service Level Agreements (SLAs) and Two-Way Active Measurement Protocol (TWAMP)
standards implemented on the switch.
Syntax Description This command has no arguments or keywords.
Defaults Displays the IP SLAs and TWAMP standards implemented on the switch.
Command Modes
User EXEC
Command History Release
12.2(52)SE
Usage Guidelines
Use the show ip sla standards command to display the IP SLAs TWAMP standards implemented on the
switch.
Examples
The following is sample output from the show ip sla standards command:
Switch> show ip sla standards
Feature
TWAMP Server
TWAMP Reflector
Related Commands Command
show ip sla twamp
connection
requests}
show ip sla twamp
session
Catalyst 3750 Metro Switch Command Reference
2-506
show ip sla standards
Modification
This command was introduced.
Organization
IETF
IETF
Description
Displays IP SLAs TWAMP connections.
{detail |
Displays IP SLAs TWAMP sessions.
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
Standard
draft-ietf-ippm-twamp-06
draft-ietf-ippm-twamp-06
OL-9645-10