Cisco Catalyst 3750 Metro Command Reference Manual page 310

mls qos dscp-mutation
Examples This example shows how to define the DSCP-to-DSCP-mutation map named dscpmutation1and to apply
the map to a port:
Switch(config)# mls qos map dscp-mutation dscpmutation1 10 11 12 13 to 30
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# mls qos trust dscp
Switch(config-if)# mls qos dscp-mutation dscpmutation1
This example show how to remove the DSCP-to-DSCP-mutation map name dscpmutation1 from the port
and to reset the map to the default:
Switch(config-if)# no mls qos dscp-mutation dscpmutation1
You can verify your settings by entering the show mls qos maps privileged EXEC command.
Related Commands Command
mls qos map
mls qos trust
show mls qos maps
Catalyst 3750 Metro Switch Command Reference
2-282
Description
dscp-mutation Defines the DSCP-to-DSCP-mutation map.
Configures the port trust state.
Displays QoS mapping information.
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
OL-9645-10