Chapter 2
Catalyst 3750 Metro Switch Cisco IOS Commands
Examples
This example shows how to configure the LACP port priority on a port:
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# lacp port-priority 1000
You can verify your settings by entering the show lacp [channel-group-number] internal privileged
EXEC command.
Related Commands
Command
channel-group
lacp system-priority
show lacp
internal
OL-9645-10
[channel-group-number]
Description
Assigns an Ethernet port to an EtherChannel group.
Configures the LACP system priority.
Displays internal information for all channel groups or for
the specified channel group.
Catalyst 3750 Metro Switch Command Reference
lacp port-priority
2-231