Motion - FLIR Ariel Gen IIICB-3308 User And Installation Manual

Configuration and Operation
Setting a low threshold (for example, 25) means that the camera is more sensitive to noise, which results
in more alerts (displayed in red). The setting depends on the situation and environment. If the scene is
located in a quiet place, it is possible to use lower threshold. A noisy location requires a higher threshold.
When selecting Record to Edge, the recording includes the audio track. OSD must be enabled on the
Events Source > Audio screen, as well as from the
to insert on-screen displays on clips and snapshots.
Note:
Recording must be enabled from the
record audio.
To enable using audio
1. Select the Audio checkbox. By default, Audio is not enabled.
To set the audio level
1. Move the Sound Intensity Threshold slider to the desired level between 1-100.
See relevant instructions in the Alarm section for the following actions:
Store a snapshot, Record the event on the
text, or Set the arming schedule

5.3.1.5.3 Motion

The Events Source > Motion screen is used for:
·
Enabling and defining the motion zone area settings
·
Sending an alarm upon a motion event in the camera's microSD card
·
Defining the method for storing a snapshot in the camera's microSD card
·
Sending a snapshot of the event to an FTP server
·
Recording an event in the camera's microSD card
·
Sending email notifications
·
Displaying text on-screen upon a motion event
·
Setting the arming schedule
60
System > Basic Configuration > OSD
System > Events Handler > Recording Settings
camera, Sending an email
CB-3304/CB-3308 User and Installation Guide
screen, in order
screen in order to
notification, Define OSD
March 10, 2019