Adjusting And Framing-Up The Camera View; Figure 25: Mounting Bracket - FLIR CB-5222 User And Installation Manual

8 Adjusting and Framing-Up the Camera
View
After the camera is connected to the network and running, it is necessary to frame-up the scene and
adjust the camera settings to optimize the picture for the individual scenes. If Latitude is being used,
consider scheduling different settings for changing ambient conditions throughout the day, week,
month or seasons.
To adjust and frame-up the camera view
After the unit's web interface opens, use the function buttons on the Home page to adjust
the zoom or focus.
Tip:
To view greater image detail for more accurate high-definition focusing, on the web
interface Home page, click the Full Screen
check the focus.
Note:
Best focusing results can be achieved when the lens iris is fully open (such as at night in
low light). This prevents loss of sharpness if light levels are reduced at night.
From the unit's Camera > Exposure screen, do one of the following:
If you selected Shutter WDR On from the
mode (WDR Multiple Shutter).
If you selected Shutter WDR Off from the
mode (Auto Shutter).
Save changes and complete the focusing steps.
Adjust the pan and tilt:
Loosen the tension screw on the mounting bracket.
April 25, 2017
Camera >
Camera >

Figure 25: Mounting Bracket

CB-5222 User and Installation Guide

Adjusting and Framing-Up the Camera View

button and use the full screen view to
Misc. screen, select the default
Misc. screen, select the default
31