Related Manuals - Omron NJ501-1400 User Manual

Related Manuals

Related Manuals
The followings are the manuals related to this manual. Use these manuals for reference.
Manual name Cat. No.
NJ-series CPU Unit W500
Hardware User's Manual
NJ/NX-series CPU Unit W501
Software User's Manual
NJ/NX-series Instruc- W502
tions Reference Manual
NJ/NX-series CPU Unit W507
Motion Control User's
Manual
NJ/NX-series Motion W508
Control Instructions Ref-
erence Manual
NJ/NX-series CPU Unit W505
Built-in EtherCAT® Port
User's Manual
NJ/NX-series CPU Unit W506

Built-in EtherNet/IP Port
User's Manual
NJ-series Database Con- W527
nection CPU Units User's
Manual
NJ-series SECS/GEM W528
CPU Units User's Man-
ual
NJ-series NJ Robotics W539
CPU Unit User's Manual
NJ/NX-series Trouble- W503
shooting Manual
Sysmac Studio Version 1 W504
Operation Manual
36
Model numbers Application
NJ501-
Learning the basic specifi-
NJ301-
cations of the NJ-series
NJ101-
CPU Units, including intro-
ductory information, design-
ing, installation, and
maintenance. Mainly hard-
ware information is pro-
vided.
NX701- Learning how to program
NX1P2- and set up an NJ/NX-series
NJ501- CPU Unit. Mainly software
NJ301- information is provided.
NJ101-
NX701- Learning detailed specifica-
NX1P2- tions on the basic instruc-
NJ501- tions of an NJ/NX-series
NJ301- CPU Unit.
NJ101-
NX701- Learning about motion con-
NX1P2- trol settings and program-
NJ501- ming concepts.
NJ301-
NJ101-
NX701- Learning about the specifi-
NX1P2- cations of the motion control
NJ501- instructions.
NJ301-
NJ101-
NX701- Using the built-in EtherCAT
NX1P2- port on an NJ/NX-series
NJ501- CPU Unit.
NJ301-
NJ101-
NX701- Using the built-in Ether-
NX1P2- Net/IP port on an NJ/NX-
NJ501- series CPU Unit.
NJ301-
NJ101-
NJ501-120 Using the database connec-
NJ101-20 tion service with NJ-series
Controllers
NJ501-1340 Using the GEM Services
with NJ-series Controllers.
NJ501-4 Controlling robots with NJ-
series CPU Units.
NX701- Learning about the errors
NX1P2- that may be detected in an
NJ501- NJ/NX-series Controller.
NJ301-
NJ101-
SYSMAC- Learning about the operat-
SE2 ing procedures and func-
tions of the Sysmac Studio.
Description
An introduction to the entire NJ-series system is
provided along with the following information on
the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
The following information is provided on a Control-
ler built with an NJ/NX-series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 language
specifications
The instructions in the instruction set (IEC 61131-3
specifications) are described.
The settings and operation of the CPU Unit and
programming concepts for motion control are
described.
The motion control instructions are described.
Information on the built-in EtherCAT port is pro-
vided. This manual provides an introduction and
provides information on the configuration, features,
and setup.
Information on the built-in EtherNet/IP port is pro-
vided. Information is provided on the basic setup,
tag data links, and other features.
Describes the database connection service.
Provides information on the GEM Services.
Describes the functionality to control robots.
Concepts on managing errors that may be
detected in an NJ/NX-series Controller and infor-
mation on individual errors are described.
Describes the operating procedures of the Sysmac
Studio.
NJ-series CPU Unit Hardware User's Manual (W500)