Omron NJ501-1400 User Manual page 288

Appendices
 Basic Mixed I/O Units
Type of
Unit
Basic I/O 24-VDC
Units Inputs/Transis-
tor Output Units
TTL I/O Units
Reading External Connection and Terminal-Device Variable
Diagrams
• I/O terminals in the external connection and terminal-device variable diagrams are shown as viewed
from the front panel of the Unit.
• Terminal numbers A0 to A9 and B0 to B9 are used in this manual, but they are not printed on all
Units.
• A0 to A20 and B0 to B20 are printed on the Units.
• The signal names of the terminals are the device variable names. The device variable names are the
names that use "Jxx" as the device name.
A-4
Name
Sinking Fujitsu connector
output
Inputs: 24 VDC
Outputs: 12 to 24 VDC, 0.5 A
MIL connector
Inputs: 24 VDC
Outputs: 12 to 24 VDC, 0.5 A
Fujitsu connector
Inputs: 24 VDC
Outputs: 12 to 24 VDC, 0.3 A
MIL connector
Inputs: 24 VDC
Outputs: 12 to 24 VDC, 0.3 A
Sourcing MIL connector
output
Input: 24 VDC
Outputs: 24 VDC, 0.5 A, load short-cir-
cuit protection
Inputs: 5 VDC
Outputs: 5 VDC, 35 mA
I/O specifications
16 inputs
16 outputs
32 inputs
32 outputs
16 inputs
16 outputs
32 inputs
32 outputs
NJ-series CPU Unit Hardware User's Manual (W500)
Model Page
CJ1W-MD231 A-41
CJ1W-MD233 A-43
CJ1W-MD261 A-44
CJ1W-MD263 A-46
CJ1W-MD232 A-48
CJ1W-MD563 A-50