Omron NJ501-1400 User Manual page 273

Event name SD Memory Card Program Transfer Completed
Meaning Transferring the SD Memory Card programs was completed.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
_Card1PrgTransferSta
Cause and Assumed cause
correction
Transferring the SD Memory Card
programs was completed.
Attached None
information
Precautions/ None
Remarks
*1 This event code occurs for unit version 1.11 or later of the CPU Unit.
NJ-series CPU Unit Hardware User's Manual (W500)
Source details
Information Recovery
--- Operation
Data type
_sPRGTRANSFER_STA
Correction
---
5 Troubleshooting
Event code
90210000 hex
None Detection
timing
--- Log category
Not affected.
Name
SD Memory Card Program Transfer
Status
Prevention
---
*1
When transfer-
ring SD Memory
Card programs is
completed
System
5
5-93