Omron NJ501-1400 User Manual page 69

• Use only NJ-series Power Supply Units on NJ-series CPU Racks and Expansion Racks.
Operation is not possible if you use a CJ-series Power Supply Unit with an NJ-series CPU Unit
or an NJ-series Power Supply Unit with a CJ-series CPU Unit.
SD Memory Card
Model
HMC-SD291
HMC-SD491
Note Refer to 3-2-1 Models and Specifications for details on SD Memory Cards.
I/O Control Unit
Model
CJ1W-IC101
End Cover
Model
CJ1W-TER01
Others
Name
DIN Track
Connecting cable for peripheral USB
port (to connect the Sysmac Studio)
Battery Set
Sysmac Studio
Standard Edition
NJ-series CPU Unit Hardware User's Manual (W500)
Card type
SD Card
SDHC Card
Specifications
An I/O Control Unit is required to connect an NJ-series
Expansion Rack to an NJ-series CPU Rack. The I/O Con-
trol Unit must be connected immediately to the right of
the CPU Unit. Connect to the I/O Interface Unit (CJ1W-
II101) on the Expansion Rack with a CS/CJ-series I/O
Connecting Cable.
Specifications
The End Cover must be connected to the right end of the
NJ-series CPU Rack. (A Controller error in the major fault
level will occur if the End Cover is not connected to the
right end of the Rack.) One End Cover is provided with
the CPU Unit and with an I/O Interface Unit.
Model
PFP-50N
PFP-100N
PFP-100N2
PFP-M
Commercially avail-
able USB cable
CJ1W-BAT01
SYSMAC-SE
2 System Configuration
Capacity Format
2 GB FAT16
4 GB FAT32
Current consump-
5 VDC
0.02 A
Current con-
Included with the CPU Unit or
Expansion Unit.
Specifications
Track length: 50 cm, height: 7.3 mm
Track length: 1 m, height: 7.3 mm
Track length: 1 m, height: 16 mm
Stopper to prevent Units from moving on the track.
Two each are provided with the CPU Unit and with
an I/O Interface Unit.
USB 2.0 certified cable (A connector - B connec-
tor), 5.0 m max.
For CJ2 CPU Unit
The Sysmac Studio is a Support Software pack-
age that provides an integrated development
environment to design, program, debug, and
maintain SYSMAC NJ-series Controllers. The fol-
lowing Support Software is included.
• Sysmac Studio
• Network Configurator
• CX-Integrator
• CX-Protocol
• CX-Designer
Number of over-
writes
100,000
100,000
tion
Weight
24 VDC
--- 70 g max.
Weight
sumption
2-7
2