Omron NJ501-1400 User Manual page 201

Event code Event name
10330000 hex SD Memory
(Ver. 1.11 or Card Pro-
later) gram Trans-
fer Pre-
execution
Check Error
NJ-series CPU Unit Hardware User's Manual (W500)
Meaning Assumed cause
An error was • An SD Memory Card is not
detected in pre- inserted.
execution checks
• The SD Memory Card type is
for transferring SD
not correct.
Memory Card pro-
• The format of the SD Memory
grams.
Card is not correct.
• There is no such folder on the
SD Memory Card as specified
by the _Card1PrgTransfer-
Cmd.DirName system-defined
variable.
• There are no backup files in
such a folder on the SD Mem-
ory Card as specified by the
_Card1PrgTransferCmd.Dir-
Name system-defined variable.
• Either the backup files in the
folder specified by the
_Card1PrgTransferCmd.Dir-
Name system-defined variable
on the SD Memory Card are
corrupted or required data is
not in the backup files on the
SD Memory Card.
• The unit version of the CPU
Unit to which to transfer the
files is older than the unit ver-
sion of the backup files on the
SD Memory Card.
• The model of the CPU Unit to
which to transfer the files is not
the same as the model of the
CPU Unit of the backup files on
the SD Memory Card.
• The CPU Unit is write-pro-
tected.
• Required files are not set to
transfer in the setting of the
_Card1PrgTransferCmd sys-
tem-defined variable.
• Reading the data for the SD
Memory Card program transfer
failed because the SD Memory
Card is faulty or not formatted
correctly.
• The SD Memory Card is dam-
aged.
• The database connection ser-
vice version of the CPU Unit to
which to transfer the files is
older than the database con-
nection service version of the
backup files on the SD Memory
Card.
• The robot version of the CPU
Unit to which to transfer the
files is older than the robot ver-
sion of the backup files on the
SD Memory Card.
5 Troubleshooting
Level
Maj Prt Min Obs Info
S page 5-62
Reference
5
5-21