Omron NJ501-1400 User Manual page 205

Event code Event name
102C0000 hex Restore
(Ver. 1.03 or Operation
later) Failed
NJ-series CPU Unit Hardware User's Manual (W500)
Meaning Assumed cause
• Password of Restore by sys-
tem-defined variable in the
Controller Setup does not
agree with the _Card1Resto-
reCmd.Password system-
defined variable.
• The DIP switch on the CPU
Unit is not set to allow starting
the restore of SD Memory Card
backups by specification with
system-defined variables.
• There is no such folder as
specified by the system-defined
variable.
• Required files are not set to
transfer in the setting of the
system-defined variable.
The restore opera- • It was not possible to read the
tion ended in an data to restore.
error.
• The SD Memory Card was
removed during a restore oper-
ation.
• Failed to restore Unit or slave.
• The SD Memory Card is dam-
aged.
5 Troubleshooting
Level
Maj Prt Min Obs Info
S page 5-76
Reference
5
5-25