Omron NJ501-1400 User Manual page 266

5 Troubleshooting
Event name Variable Changed to TRUE with Forced Refreshing
Meaning Changing a variable to TRUE with forced refreshing was specified.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
Changing a variable to TRUE with
forced refreshing was specified by the
user.
Attached None
information
Precautions/ None
Remarks
Event name Variable Changed to FALSE with Forced Refreshing
Meaning Changing a variable to FALSE with forced refreshing was specified.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
Changing a variable to FALSE with
forced refreshing was specified by the
user.
Attached None
information
Precautions/ None
Remarks
Event name All Forced Refreshing Cleared
Meaning Clearing all forced refreshing values was specified.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
Clearing all forced refreshing values
was specified by the user.
Attached None
information
Precautions/ None
Remarks
5-86
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Event code 90080000 hex
None Detection
timing
--- Log category
Operation is performed according to the forced refreshing
values.
Name
---
Prevention
---
Event code 90090000 hex
None Detection
timing
--- Log category
Operation is performed according to the forced refreshing
values.
Name
---
Prevention
---
Event code 900A0000 hex
None Detection
timing
--- Log category
Forced refreshing values are all cleared and operation is
performed according to the user program.
Name
---
Prevention
---
NJ-series CPU Unit Hardware User's Manual (W500)
Commands from
user
Access
Commands from
user
Access
Commands from
user
Access