5
SYSTEM CONFIGURATION
5.1
CC-Link System Configuration
A CC-Link system when a master/intelligent device module operates as a master station is configured with a master station
(1), remote I/O station (2), remote device station (3), and intelligent device station (4).
Connect the terminating resistors (5) to the stations at both ends.
(1)
(5)
(5)
The CC-Link version and the number of slave stations that can be connected vary depending on the mode of the master/
intelligent device module. (Page 20 Maximum Number of Connectable Modules (when operating as a master station))
5 SYSTEM CONFIGURATION
50
5.1 CC-Link System Configuration
(2)
(3)
(3)
(4)