Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 7

[STARTUP AND MAINTENANCE PRECAUTIONS]
CAUTION
● Do not disassemble or modify the programmable controller. Doing so may cause fire, equipment
failures, or malfunctions.
For repair, contact your local Mitsubishi Electric representative.
● Turn off the power to the programmable controller before connecting or disconnecting any extension
cable. Failure to do so may cause equipment failures or malfunctions.
● Turn off the power to the programmable controller before attaching or detaching the following devices.
Failure to do so may cause equipment failure or malfunction.
- Peripherals, extension board, extension adapter, and connector conversion adapter
- Extended module, bus conversion module, and connector conversion module
- Battery
[OPERATION PRECAUTIONS]
CAUTION
● Construct an interlock circuit in the program so that the whole system always operates on the safe
side before executing the control (for data change) of the PLC in operation. Read the manual
thoroughly and ensure complete safety before executing other controls (for program change,
parameter change, forcible output and operation status change) of the PLC in operation. Otherwise,
the machine may be damaged and accidents may occur by erroneous operations.
[DISPOSAL PRECAUTIONS]
CAUTION
● Please contact a certified electronic waste disposal company for the environmentally safe recycling
and disposal of your device.
[TRANSPORTATION PRECAUTIONS]
CAUTION
● The programmable controller is a precision instrument. During transportation, avoid impacts larger
than those specified in the general specifications described in the User's Manual (Hardware) of the
CPU module used by using dedicated packaging boxes and shock-absorbing palettes. Failure to do
so may cause failures in the programmable controller. After transportation, verify operation of the
programmable controller and check for damage of the mounting part, etc.
5