Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 123

Error Error details and causes
code
B3A7H System error
B3A8H System error
B3A9H The remote I/O use points exceeds the remote I/O
permission points.
B3F1H System error
to
B3F3H
B407H System error
B409H System error
B416H System error
B417H System error
B418H System error
B419H System error
B41AH System error
B601H An unsupported request was received.
B602H Too many transient requests were sent to the
corresponding station.
B603H Too many transient requests were sent to the
corresponding station.
B604H Transient transmission was performed during a line test.
B605H The transient storage buffer data was failed to be obtained.
B606H System error
B60CH System error
B700H System error
B705H System error
B706H System error
B771H Too many transient requests were sent to the
corresponding station.
B772H System error
B773H System error
B774H The target station was not an intelligent device station.
B777H Unsupported transient data was received.
B779H System error
B781H System error
B782H When connection to another station is set, the sending
destination station and the sending source station are the
same.
B783H When data larger than 1K was being sent in transient
transmission, an error has occurred in the transient storage
buffer.
B801H System error
to
B805H
B807H System error
B80AH System error
B80DH System error
B80FH System error
to
B812H
B817H System error
B821H System error
B822H System error
B824H System error
B826H System error
Corrective Action
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
• Review the I/O points of the whole system.
• Review the remote I/O points used in the whole system.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Check and correct the request data or the target station
number.
Wait for a while and send the request again.
Wait for a while and send the request again.
Wait for a while and send the request again.
Wait for a while and send the request again.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Wait for a while and send the request again.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Check if the target station is an intelligent device station.
Check the application on the source that issued the
request.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Check the station number of the destination or change the
setting to connection to the own station.
Wait for a while and send the request again.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Please consult your local Mitsubishi representative.
Detailed
information








































9 TROUBLESHOOTING
121
9.5 List of Error Codes
9