Caution For Compliance With Ec Directive - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

Caution for compliance with EC Directive

Caution for when the FX5-CCL-MS is used
When the FX5-CCL-MS is used, attach a ferrite core to the power supplies of the CPU module and the FX5-CCL-MS. Make 2
turns around the ferrite core and attach within approximately 200 mm from the terminal block and connectors of the power
cable. (Ferrite core used in Mitsubishi Electric's test: E04SR401938 manufactured by SEIWA ELECTRIC MFG. CO., LTD.)
Caution for when the CC-Link cable is used
Ver.1.10-compatible CC-Link dedicated cable is a shielded cable, so ground it at both ends. Strip a part of the jacket of the
cable as shown below and ground the exposed shield as much as possible.
APPX
126
Appendix 2 Standards
Shield
Clamp metal fitting