7.
Set the link refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [FX5-CCL-MS] [Module Parameter] [Basic Settings]
[Link Refresh Settings]
8.
Set the supplementary cyclic settings as follows.
[Navigation window] [Parameter] [Module Information] [FX5-CCL-MS] [Module Parameter] [Application
Settings] [Supplementary Cyclic Settings]
9.
Set the target station number of the remote device initial setting as follows.
[Navigation window] [Parameter] [Module Information] [FX5-CCL-MS] [Module Parameter] [Basic Settings]
[Initial Settings]
10.
Double-click "No. of Registered Procedures" to open the "Remote Device Initial Setting Procedure Registration" window.
8 PROGRAMMING
80
8.2 Example of Communications Between a Master Station, a Remote Device Station and a Remote I/O Station