Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 152

No. Name
SW0059 Transmission
speed setting
SW005B Transmission
speed operation
status
SW005C Detailed LED
display status (2)
SW005F Remote device
station
initialization
procedure
registration
instruction result
SW0060 Mode setting
status
SW0061 Station number of
own station
APPX
150
Appendix 6 List of Link Special Register (SW) Areas
Description
Stores the transmission speed setting status. Auto-tracking (b15) is enabled
only at intelligent device stations.
0: Not set
1: Setting
b15 b14 b8 b7 b6 b5 b4 b3
to 0
0
Stores the transmission speed operation status. The bit "During auto-tracking"
enables stations only at intelligent device stations.
0: Not in operation
1: Operation
b15 b14 b8 b7 b6 b5 b4 b3
to
0 0
Stores the detailed display status of the module LED.
0: Off
1: On
b15 b12 b11b10 b9 b8 b7
0 to 0
• The use of b0 to b6 is prohibited.
Stores whether the initialization procedure registration instruction using SB000D
has been normally completed.
0: Normal
Values other than 0: Error code (Page 118 List of Error Codes)
Stores the mode setting status.
0: Online (remote net mode)
2: Offline
3: Line test 1
4: Line test 2
6: Hardware test
Stores the current own station's station number.
0: Master Station
1 to 64 Intelligent device station
b2 b1 b0
0 0 0
10 Mbps
5 Mbps
2.5 Mbps
625 kbps
156 kbps
Auto-tracking
b2 b1 b0
0 0 0
10 Mbps
5 Mbps
2.5 Mbps
625 kbps
156 kbps
During auto-tracking
b6 b0
to
Transmission speed setting
156 kbps
Transmission speed setting
625 kbps
Transmission speed setting
2.5 Mbps
Transmission speed setting
5 Mbps
Transmission speed setting
10 Mbps
Availability
(: Available, : Not available)
Online Offline
Master Intelligent
Station device
station
  
  
  
  
  
  