Transmission Speed - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

Transmission speed

Set the transmission speed of the master/intelligent device module.
Item Description
Transmission Set the transmission speed of the master/
speed intelligent device module.
Precautions
• When "Transmission Speed" is set to "Auto-tracking", it takes approximately five seconds for the transmission speed to be
established with auto-tracking after the power-on. When a station returns after disconnection, it also takes approximately
five seconds for the transmission speed to be established with auto-tracking. When the terminal block is installed or
removed or line status becomes unstable during the power-on, it may takes five seconds or longer for the transmission
speed to be established.
• Set the same transmission speed in all the stations in the CC-Link system. Data link cannot be performed with a slave
station where the different transmission speed from the master station is set.
• The transmission speed that can be set varies depending on the overall distance of Ver.1.10-compatible CC-Link dedicated
cable. (Page 22 Maximum Overall Cable Length)
• Check whether the same transmission speed are set for both the master station and slave stations by obtaining (checking)
the transmission speed setting using the operation test of CC-Link diagnostics. (Page 106 Checking the transmission
speed setting)
Setting range
Master station
• 156kbps
• 625kbps
• 2.5Mbps
• 5Mbps
• 10Mbps
(Default: 156kbps)
Intelligent device station
• 156kbps
• 625kbps
• 2.5Mbps
• 5Mbps
• 10Mbps
• Auto-tracking
(Default: Auto-tracking)
7 PARAMETER SETTINGS
7.2 Required Settings
7
61