Revision History - Basler Racer User Manual

AW00118508000

Revision History

Doc. ID Number Date
AW00118501000 13 Jun 2012
AW00118502000 01 Feb 2013
AW00118503000 25 Jun 2013
AW00118504000 13 Sep 2013
AW00118505000 01 Oct 2015
AW00118506000 08 Sep 2016
Basler racer Camera Link
Changes
Preliminary release of this document. Applies to prototype cameras only.
Second preliminary release of this document for prototype cameras.
First release of this document for series cameras.
Updated the contact information for Asia.
Added bit depth to Fig. 1 in Section 1.3 on page 8.
Added dimension values to Fig. 2 in Section 1.4.1 on page 9.
Modified dimension values in Fig. 4 on page 12 and Fig. 5 on page 12.
Updated the LZ4 licensing text in Section 1.5.2 on page 17.
Replaced the reference to a racer Camera Link-specific installation and
setup guide by a reference to document AW000611 in Section 2 on page 24
and Section 3 on page 25.
Included a reference to the racer-specific document about register structure
and access methods (AW001270) in Section 3.2 on page 27.
Minor corrections and modifications throughout the manual.
Updated the contact information on the back of the front page.
Corrected subpart J to subpart B in the FCC section at the back of the front
page.
Added references to CE Conformity Declaration in Section 1.2 on page 2.
Updated the dimensions of the F-mount lens adapter in Section 1.2 on
page 2 and Section 1.4.3 on page 12.
Added environmental requirements according to UL 60950-1 in Section
1.7.1 on page 19.
Changed maximum housing temperature during operation from 50 °C to
60 °C in Section 1.7.1 on page 19 and Section 1.7.2 on page 19.
Added precautions related to SELV and LPS in Section 1.8 on page 21.
Updated Section 3.1 on page 25 to reflect software update to Basler pylon
Camera Software Suite.
Updated the power cable drawing in Section 5.4.1 on page 37.
Added information about "low level" code and the Instant Camera classes
in Chapter 6 on page 55.
Added information about the AcquisitionLineRateAbs parameter in Section
6.1.1 on page 55.
Added the M42-mount FBD 45.46 and M58-mount adapters to the
specification tables in Section 1.2 on page 2, to the lens adapter drawings
in Section 1.5.3 on page 13, and to the table in Section 1.5.4 on page 16.
Added Section 1.3 on page 8 ("Accessories").
Added the ExposureOverlapTimeMaxAbs and the TargetGrayValue
parameters to the list of parameters whose limits can be removed in
Section 8.3 on page 106.
Added the Auto Functions feature in Section 8.5 on page 110.
Revision History
151