Table of Contents
Advertisement
Figure 62. Installation Tool B
Figure 63. Installation tool handle adjustment
Attention:
• Do not press the microprocessor into the socket.
• Make sure that the microprocessor is oriented and aligned correctly in the socket before
you try to close the microprocessor retainer.
• Do not touch the thermal material on the bottom of the heat sink or on top of the
microprocessor. Touching the thermal material will contaminate it.
Step 8.
Remove the microprocessor socket cover, tape, or label from the surface of the microprocessor
socket, if one is present. Store the socket cover in a safe place.
76
Lenovo System x3650 M4 HD Installation and Service Guide
E5-x6xx
E5-x6xx v2
Advertisement
Table of Contents
Troubleshooting
