Table of Contents
Advertisement
Installation tool
Microprocessor
Cover
Figure 60. Installation tool cover removal
c.
Align the installation tool with the microprocessor socket. The installation tool rests flush on
the socket only if properly aligned.
Figure 61. Installation tool alignment
d.
Install the microprocessor using the following instructions for your installation tool.
• If using Installation Tool A, twist the handle on the microprocessor tool assembly
counterclockwise to the open position to insert the microprocessor into the socket, and
lift the installation tool out of the socket.
• If using Installation Tool B, twist the handle of the installation tool assembly counterclockwise
until the microprocessor is inserted into the socket, and lift the installation tool out of the
socket. The following illustration shows the tool handle in the open position.
.
Chapter 2
Installing optional devices
75
Advertisement
Table of Contents
Troubleshooting
