Table of Contents
Advertisement
In addition, the ASU program provides IMM LAN over USB interface configuration through the command-line
interface.
Use the command-line interface to issue setup commands. You can save any of the settings as a file and run
the file as a script. The ASU program supports scripting environments through a batch-processing mode.
For more information and to download the ASU program, go to https://support.lenovo.com/us/en/
documents/LNVO-ASU.
Updating Systems Director
Use this information to update the Systems Director.
If you plan to use Systems Director to manage the server, you must check for the latest applicable Systems
Director updates and interim fixes.
Note: Changes are made periodically to the website. The actual procedure might vary slightly from what is
described in this document.
Installing a newer version
To locate and install a newer version of Systems Director, complete the following steps:
Step 1.
Check for the latest version of Systems Director:
a.
Go to http://www.ibm.com/systems/management/director/downloads.html.
b.
If a newer version of Systems Director than what comes with the server is shown in the
drop-down list, follow the instructions on the web page to download the latest version.
Step 2.
Install the Systems Director program.
Installing updates with your management server is connected to the Internet
If your management server is connected to the Internet, to locate and install updates and interim fixes,
complete the following steps:
Step 1.
Make sure that you have run the Discovery and Inventory collection tasks.
Step 2.
On the Welcome page of the Systems Director web interface, click View updates.
Step 3.
Click Check for updates. The available updates are displayed in a table.
Step 4.
Select the updates that you want to install, and click Install to start the installation wizard.
Installing updates with your management server is not connected to the Internet
If your management server is not connected to the Internet, to locate and install updates and interim fixes,
complete the following steps:
Step 1.
Make sure that you have run the Discovery and Inventory collection tasks.
Step 2.
On a system that is connected to the Internet, go to http://www.ibm.com/support/ fixcentral.
Step 3.
From the Product family list, select Systems Director.
Step 4.
From the Product list, select Systems Director.
Step 5.
From the Installed version list, select the latest version, and clickContinue.
Step 6.
Download the available updates.
Step 7.
Copy the downloaded files to the management server.
Step 8.
On the management server, on the Welcome page of the Systems Director web interface, click
the Manage tab, and click Update Manager.
116
Lenovo System x3650 M4 HD Installation and Service Guide
Advertisement
Table of Contents
Troubleshooting
