Table of Contents
Advertisement
Figure 130. Power paddle card cover removal
Step 5.
Lift the power paddle card cover out of the server.
Step 6.
If you are instructed to return the power paddle card cover, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Replacing the safety cover
Use this information to replace the safety cover.
Replacing the 240 VA safety cover
Use this information to replace the 240 VA safety cover.
To install the 240 VA safety cover, complete the following steps:
Step 1.
Read the safety information that begins on "Safety" on page v and "Installation guidelines"
on page 34.
Step 2.
Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3.
Line up and insert the tabs on the bottom of the safety cover into the slots on the system board.
208
Lenovo System x3650 M4 HD Installation and Service Guide
Safety cover
Screw
Advertisement
Table of Contents
Troubleshooting
