Table of Contents
Advertisement
Step 9.
Close the cover of the holder.
Figure 128. Holder-cover close
Step 10. Reinstall the cover (see "Replacing the cover" on page 196).
Step 11. Slide the server into the rack.
Step 12. Reconnect the power cords and all external cables, and turn on the server and peripheral devices.
Removing the safety cover
Use this information to remove the safety cover.
Removing the 240 VA safety cover
Use this information to remove the 240 VA safety cover.
To remove the 240 VA safety cover, complete the following steps:
Step 1.
Read the safety information that begins on "Safety" on page v and "Installation guidelines"
on page 34.
Step 2.
Turn off the server, and disconnect all power cords and external cables.
Step 3.
Remove the cover (see "Removing the cover" on page 195).
Step 4.
Remove the screws from the safety cover.
206
Lenovo System x3650 M4 HD Installation and Service Guide
Advertisement
Table of Contents
Troubleshooting
