Table of Contents
Advertisement
Power
Mini-SAS cable
cable
Mini-SAS cable
Figure 110. 24x2.5-inch hot-swap HDD model cable connection
24x2.5-inch drive model with 3 same backplanes
The internal routing and connectors for the 24x2.5-inch drive model cables.
The following illustration shows the internal routing and connectors for the 24x2.5-inch hot-swap HDD model.
Note: Make sure that Port 1 on the hardware ServeRAID is connected to Port 1 on the backplane. Likewise,
Port 0 on the hardware ServeRAID should be connected to Port 0 on the backplane.
Configuration
cable
Backplane
Power
cable
Backplane
connection
cable
Configuration
cable
Expander
Configuration
cable
Power
cable
.
Chapter 6
Removing and replacing components
Backplane
189
Advertisement
Table of Contents
Troubleshooting
