Lenovo System x3650 M4 HD Installation And Service Manual page 85

Microprocessor Installation Tool A
Figure 57. Microprocessor installation tools
To install an additional microprocessor and heat sink, complete the following steps:
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines"
on page 34.
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables.
Attention: When you handle static-sensitive devices, take precautions to avoid damage from
static electricity. For details about handling these devices, see "Handling static-sensitive devices"
on page 36.
Step 3. Remove the cover (see "Removing the cover" on page 37).
Step 4. Remove the air baffle (see "Removing the air baffle" on page 38).
Step 5. Rotate the heat sink retention module release lever to the open position.
Installation tool
Microprocessor
Cover
Microprocessor Installation Tool B
Installation tool
Microprocessor
Chapter 2
.
Installing optional devices
73