Lenovo System x3650 M4 HD Installation And Service Manual page 298

Installation tool
Microprocessor
Figure 213. Installation tool alignment
c. Using the following instructions for your installation tool to remove the microprocessor.
• If using Installation Tool A, gently twist the handle clockwise to the closed position and
lift the microprocessor out of the socket.
• If using Installation Tool B, gently twist the handle of the installation tool clockwise until it
locks in the "H" or "L" position, depending on the size of microprocessor, and then lift the
microprocessor out of the socket.
Microprocessor
Figure 214. Installation tool handle adjustment
d. Lift the microprocessor out of the socket.
286
Lenovo System x3650 M4 HD Installation and Service Guide
Alignment
pins
Handle
Installation
tool