Table of Contents
Advertisement
Figure 164. Network adapter installation
Step 8.
Press the adapter firmly until the pin, and retention brackets engage the adapter. Make sure the
adapter is securely seated on the connector on the system board.
Attention: Make sure the port connectors on the adapter are aligned properly with the chassis on
the rear of the server. An incorrectly seated adapter might cause damage to the system board
or the adapter.
Step 9.
Fasten the thumbscrew on the rear side of the chassis.
240
Lenovo System x3650 M4 HD Installation and Service Guide
Network
adapter
Retention
brackets
Captive screws
Thumbscrew
Pin
Network
adapter connector
Screw holes
Advertisement
Table of Contents
Troubleshooting
