Ll_Usart_Disablehalfduplex; Ll_Usart_Isenabledhalfduplex; Ll_Usart_Setlinbrkdetectionlen - ST STM32F2 User Manual

LL USART Generic Driver
Reference Manual to
LL API cross
reference:

LL_USART_DisableHalfDuplex

Function name
Function description
Parameters
Return values
Notes
Reference Manual to
LL API cross
reference:

LL_USART_IsEnabledHalfDuplex

Function name
Function description
Parameters
Return values
Notes
Reference Manual to
LL API cross
reference:

LL_USART_SetLINBrkDetectionLen

Function name
Function description
Parameters
Return values
Notes
1264/1371
supported by the USARTx instance.
CR3 HDSEL LL_USART_EnableHalfDuplex
__STATIC_INLINE void LL_USART_DisableHalfDuplex
(USART_TypeDef * USARTx)
Disable Single Wire Half-Duplex mode.
USARTx: USART Instance
None:
Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can
be used to check whether or not Half-Duplex mode is
supported by the USARTx instance.
CR3 HDSEL LL_USART_DisableHalfDuplex
__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex
(USART_TypeDef * USARTx)
Indicate if Single Wire Half-Duplex mode is enabled.
USARTx: USART Instance
State: of bit (1 or 0).
Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can
be used to check whether or not Half-Duplex mode is
supported by the USARTx instance.
CR3 HDSEL LL_USART_IsEnabledHalfDuplex
__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen
(USART_TypeDef * USARTx, uint32_t LINBDLength)
Set LIN Break Detection Length.
USARTx: USART Instance
LINBDLength: This parameter can be one of the following
values:
LL_USART_LINBREAK_DETECT_10B
LL_USART_LINBREAK_DETECT_11B
None:
Macro IS_UART_LIN_INSTANCE(USARTx) can be used to
check whether or not LIN feature is supported by the USARTx
DocID028236 Rev 2
UM1940