Stack Full Sensor - Olivetti DR N17 Service Manual

4.9.7 Stack Full Sensor

Removal
1 Remove the Rear Option Cover Plate and the Eliminator Assembly. ( REP 4.9.6 Option Cover/
Eliminator Assembly .)
2 Use a flat-slot screwdriver blade to unhook the Stack Full Sensor clip. (See Figure 4.9.7.1.)
3 Disconnect the connector, and remove the Stack Full Sensor.
Replacement
Perform the removal steps in reverse order.
687200Q
Figure 4.9.7.1 Stack Full Sensor Removal
Service Manual
SAS454FA
4-49