Feed Roll Assembly - Olivetti DR N17 Service Manual

4.5.2 Feed Roll Assembly

Removal
1 Remove the EP Cartridge.
2 Remove the Paper Handling Unit Assembly ( REP 4.5.1 Paper Handling Unit Assembly ).
3 Position the Paper Handling Unit Assembly on the gear side.
4 Slightly push back the two release tabs on the Feed Roll Assembly while lifting the Feed Roll up
the shaft.
5 Remove the Feed Roll Assembly by tilting and rotating the Assembly to one side.
Replacement
Perform the removal steps in reverse order
687200Q
Figure 4.5.2.1 Feed Roll Assembly Removal
Service Manual
SAS416F
4-21