Registration Sensor - Olivetti DR N17 Service Manual

4.6.3 Registration Sensor

Removal
1 Remove the Paper Handling Unit Assembly ( REP 4.5.1 Paper Handling Unit Assembly ).
2 Use a flat-slot screwdriver blade to unhook the front Sensor Registration clip. (See Figure
4.6.3.1.)
3 Insert the screwdriver blade into the opening to unhook the rear Registration Sensor clip.
4 Disconnect P123 from the Registration Sensor.
Replacement
Perform the removal steps in reverse order.
4-26
Figure 4.6.3.1 Registration Sensor Removal
SAS421F.CDR
SAS421F
687200Q