Tray Latch Spring - Olivetti DR N17 Service Manual

8.3.13 Tray Latch Spring

NOTE: The removal procedure for the Tray Latch Spring is the same for Feeders 2 and 3.
Removal
1 Remove the 500 Paper Size PWB Assembly ( REP 8.3.11 500 Paper Size PWB Assembly ).
2 Remove the one screw which secures the Tray Latch Spring from the inside of the Feeder.
3 Move the Tray Latch Spring towards the front to remove it from the Feeder.
Replacement
Perform the removal steps in reverse order.
8-22
Figure 8.3.13.1 Removing the Tray Latch Spring
SAS484FA
687200Q