Envelope Harness Assembly - Olivetti DR N17 Service Manual

11.3.13 Envelope Harness Assembly

Removal
1. Remove the Top Cover (REP 11.3.7).
2. Orient the Top Cover so that J201 can be easily accessed.
3. Remove the two screws which fasten J201.
4. Pull out the Envelope Harness Assembly through the Top Cover.
Replacement
Perform the removal steps in reverse order.
11-26
J201
Figure 11.3.13.1 Envelope Harness Assembly Removal
FRONT
SAS4D4FA
687200Q