Registration Clutch Assembly - Olivetti DR N17 Service Manual

4.6.15 Registration Clutch Assembly

Removal
1 Remove the Paper Handling Unit Assembly ( REP 4.5.1 Paper Handling Unit Assembly ).
2 Remove the Supporter ( REP 4.6.11 Supporter ).
3 Remove the Registration Bushing. (See Figure 4.6.11.1.)
4 Use a flat-slot screwdriver blade to pry off the E-ring.
5 Slide the Registration Clutch Assembly off together with the Idler Gear.
Replacement
Perform the removal steps in reverse order.
687200Q
Figure 4.6.15.1 Registration Clutch Assembly Removal
Service Manual
SAS434F
4-39