Turn Pinch Roll Assembly - Olivetti DR N17 Service Manual

4.6.13 Turn Pinch Roll Assembly

Removal
1 Remove the Paper Handling Unit Assembly ( REP 4.5.1 Paper Handling Unit Assembly ).
2 Remove the Supporter ( REP 4.6.11 Supporter ).
3 Unhook the spring on the Registration Plate side from the Release Link.
4 Remove the Turn Pinch Roll Assembly with the Turn Pinch Roll Spring.
Replacement
Perform the removal steps in reverse order.
687200Q
Figure 4.6.13.1 Turn Pinch Roll Assembly Removal
SAS432F.CDR
Service Manual
SAS432F
sas423f
4-37