Ethernet Menu - Olivetti DR N17 Service Manual

5.1.4.10 Ethernet Menu

The Ethernet Menu set options for the Ethernet port. To select the Ethernet Menu:
1 Press the MENU UP (1) or MENU DOWN (5) key until "Ethernet Menu" is displayed.
2 Press the ITEM UP (2) or ITEM DOWN (6) key to move through the Ethernet submenu.
3 Press the VALUE PLUS (3) or VALUE MINUS (7) key to select options from the submenu.
4 When the desired submenu option is displayed, press ENTER.
Job Menu
Password Menu
Tray Menu
PCL Menu
System Menu
Parallel Menu
Serial Menu
Ethernet Menu
Token Ring Menu
Novell Menu
4
Print Menu
Reset Menu
1
Appears only when the hard drive is installed.
3
Appears only when Novell is enabled from the
Ethernet and Token Ring menus.
4
This was formally called the Test Menu
5
Appears only when ONLINE and ENTER are
pressed simultaneously at Power On.
687200Q
Figure 5.1.4.10.1 Ethernet Menu
LPR Enable
1
LPR Banner
LPR PDL
LPR Binary PS
2 DLC/LLC Enable
2
DLC LLC PDL
3
DLC/LLC Bin PS
5
NetBeui Enable
NetBeui PDL
NetBeui Bin PS
AppSocket Enable
On*
On
Auto*
PCL
On
On*
Auto*
PCL
On
On*
Auto*
PCL
On
On*
Service Manual
Off
Off*
PostScript
Off*
Off
PostScript
Off*
Off
PostScript
Off*
Off
5-17