Duplex Sensor Assembly - Olivetti DR N17 Service Manual

10.3.8 Duplex Sensor Assembly

Removal
1 Remove the Duplex PWB Assembly ( REP 10.3.7 Duplex PWB Assembly ).
2 Press the claws of the Duplex Sensor Assembly inward to disengage and pull the Duplex Sensor
Assembly, together with the harness, off the Duplex Module.
Replacement
Perform the removal steps in reverse order.
687200Q
Figure 10.3.8.1 Removing the Duplex Sensor Assembly
Service Manual
SAS489F
10-15