Duplex Pwb Assembly - Olivetti DR N17 Service Manual

10.3.7 Duplex PWB Assembly

Removal
1 Remove the Duplex Cover ( REP 10.3.4 Duplex Cover ).
2 Press/pull out the pin that secures the Duplex PWB Assembly.
3 Slide the Duplex PWB Assembly upward to remove it from the Duplex Module.
4 Disconnect the three Connectors connected to the PWB Assembly.
SAS488F
Replacement
Perform the removal steps in reverse order.
10-14
Figure 10.3.7.1 Removing the Duplex PWB Assembly
Pin
687200Q