Low Voltage Power Supply (Lvps) - Olivetti DR N17 Service Manual

4.12.2 Low Voltage Power Supply (LVPS)

Removal
1 Remove the System Controller Chassis ( REP 4.12.1 System Controller Chassis ).
2 Disconnect P13 and P25 from the Print Engine Controller. (See Figure 4.12.2.1.)
3 Disconnect P16, P17, P27, P131, P1, and P3 from the LVPS.
4 Remove the four screws securing the LVPS to the Frame.
5 Pinch the heads of the three PWB standoffs to release the LVPS from the Frame.
6 Carefully remove the LVPS.
Replacement
Perform the removal steps in reverse order.
687200Q
Figure 4.12.2.1 LVPS Removal
SAS465F.CDR
Service Manual
sas465fa
4-57