Tray Menu - Olivetti DR N17 Service Manual

5.1.4.5 Tray Menu

The Tray Menu allows you to access tray settings that are common to all system languages (PCL and
PostScript). To select the Tray Menu:
1 Press the MENU UP (1) or MENU DOWN (5) key until "Tray Menu" is displayed.
2 Press the ITEM UP (2) or ITEM DOWN (6) key to move through the Tray submenu.
3 Press the VALUE PLUS (3) or VALUE MINUS (7) key to select options from the submenu.
4 When the desired submenu option is displayed, press ENTER.
Job Menu
Password Menu
Tray Menu
PCL Menu
System Menu
Parallel Menu
Serial Menu
Ethernet Menu
Token Ring Menu
3
Novell Menu
4
Print Menu
5
Reset Menu
1
Appears only when the hard drive is installed.
3
Appears only when Novell is enabled from the
Ethernet and Token Ring menus.
4
This was formally called the Test Menu
5
Appears only when ONLINE and ENTER are
pressed simultaneously at Power On.
687200Q
Figure 5.1.4.5.1 Tray Menu
Envelope Size
1
Envelope Type
MBF Size
2
2
MBF Type
Tray 1 Type
Tray 2 Type
Tray 3 Type
Tray Sequence
Com 10 (4.125x9.5) DL (110x220)
C5 (162x229)
Same as MBF Type, below
Statmt (5.5x8.5)
Exec (7.25x10.5)
Letter (8.5x11)
Legal (8.5x14)
Folio (8.5x13)
A6 (105x148)
A5 (148x210)
Plain*
Preprinted
Letterhead
Transparency
Prepunched
MBF-1
MBF-2
MBF-3
MBF-2-1
MBF-3-1
MBF-2-3
MBF-3-2
Service Manual
Monarc (3.87x7.5)
A4 (210x297)
B5-ISO (176x250)
Com 10 (4.125x9.5)
C5 (162x229)
DL (110x220)
Monarc (3.87x7.5)
Labels User type 1
Bond User type 2
Recycled User type 3
Color User type 4
Cardstock User type 5
MBF-3-2-1 3-2
MBF-2-3-1 2-3-1
MBF-1-2-3 3-2-1
1-MBF 1-2-3
2-1 Off*
3-1
2-3
5-11