Olivetti DR N17 Service Manual page 176

Message Displayed on LCD
DUPLEX PROC.
ADJUSTMENT
Sets the lead edge registration
for duplex print.
DUPLEX SCAN
ADJUSTMENT
Sets the side edge registration
for duplex print.
MBF PROC.
ADJUSTMENT
Sets the lead edge registration
for paper fed from MBF.
MBF SCAN
ADJUSTMENT
Sets the side edge registration
for paper fed from MBF.
ENVELOPE PROC.
ADJUSTMENT
Sets the lead edge registration
for envelope fed from Envelope
Tray.
ENVELOPE SCAN
ADJUSTMENT
Sets the side edge registration
for envelope fed from Envelope
Tray.
TEST PRINT
OPERATION
5-64
(Top Line)
Function
Option Values
[Factory Defaults]
Option Description
to F (16 steps) [Factory default value: A]
"0" sets the narrowest lead edge registra-
tion gap. "F" sets the widest lead edge
registration gap.
Approximately 0.54mm per step.
0 to 8 (9 steps) [Factory default value: 4]
"0" sets the narrowest left side edge regis-
tration gap. "8" sets the widest left side
edge registration gap.
Approximately 0.5mm per step
0 to F (16 steps) [Factory default value: A]
"0" sets the narrowest lead edge registra-
tion gap. "F" sets the widest lead edge
registration gap.
Approximately 0.54mm per step.
0 to 8 (9 steps) [Factory default value: 4]
"0" sets the narrowest left side edge regis-
tration gap. "8" sets the widest left side
edge registration gap.
Approximately 0.5mm per step.
0 to F (16 steps) [Factory default value: A]
"0" sets the narrowest lead edge registra-
tion gap. "F" sets the widest lead edge
registration gap.
Approximately 0.54mm per step.
0 to 8 (9 steps) [Factory default value: 4]
"0" sets the narrowest left side edge regis-
tration gap. "8" sets the widest left side
edge registration gap.
Approximately 0.5mm per step
Press the Enter key to produce the grid
test print shown in Figure 5.2.2.1.
Are
Changes
Possible?
Yes
Yes
Yes
Yes
Yes
Yes
687200Q