Error Code "0101 - Olivetti DR N17 Service Manual

7.3.17.5 Error Code "0101"

You were directed to this RAP because the Control Panel displayed the error code "0101" during the
Power On Diagnostics.
1 Switch OFF the printer power.
2 Remove the System Controller. If there is a RAM SIMM in location 2, remove it.
3 Move the RAM SIMM in location 1 into location 2.
4 Reinstall the System Controller and switch on the printer power.
5 The Control Panel displays code 0102.
Y: Replace the RAM SIMM currently in location 2.
N: Go to step 6.
6 Switch OFF the printer power.
7 Remove the System Controller and move the RAM SIMM back to location 1.
8 Reinstall the System Controller and switch on the printer power.
9 The Control Panel displays code 0101.
Y: Replace the System Controller.
N: Go to Final Actions.
7-38 687200Q