Menu Mode - Olivetti DR N17 Service Manual

5.1.4 Menu Mode

The Menu Mode allows you to set, change, or adjust the various features/options available in the
Network Laser Printer. The menus displayed on any particular printer depend upon the options installed
in the printer. If an option is not installed, the menu items for that option will not be displayed.
Entering the Menu Mode:
1 Press the MENU UP (1) or MENU DOWN (5) key. The top line of the LCD will display MENUS.
2 From the Main Menu you can access the 12 major menus. (See Figure 5.1.4.2.1 Menu Tree .)
3 Press the MENU UP (1) or MENU DOWN (5) key to scroll through the major menus.
4 When the desired major menu is displayed, press the ITEM UP (2) or ITEM DOWN (6) key to
view submenus or options available on a menu.
5 Each of the twelve major menus has a number of submenus listed under them.
6 When the desired submenu is displayed, press the ENTER key to select that submenu item.
7 In some cases you will have another level of submenus. If another level exists, press the VALUE
PLUS (3) or VALUE MINUS (7) key to scroll through the submenus, then press the ENTER key
to select the desired submenu item.
8 You will now be at the lowest level of the menus. At this level you set, change, or adjust the
feature or option you selected.
9 Use the VALUE PLUS (3) or VALUE MINUS (7) key to scroll through the settings.
10 When the desired setting is displayed, press the ENTER key to "save" your setting to NV RAM.
11 When you have completed all settings, press the ONLINE key to return the printer to the "Ready"
mode.
NOTE: On the following pages, the menu tree and all the possible menu paths will be illustrated. The
menu tree may be different on different printers depending upon the options installed. Most of the
menu selections are straight forward and can be set to match the customers requirements
without any additional information. Where additional information is required, the information is
contained in the Network Laser Printers User Guide.
5-6 687200Q