(3) Remove the drive unit and PF main PWB
1. Remove the right front cover.
2. Remove the five screws.
3. Pull the upper cover rear ends.
4. While pulling out the paper size switch,
and then remove the upper cover.
5. Release two hooks using the flat screw
driver.
6. Remove the PWB cover by pulling the
knob up.
Upper cover
Screw
Cassette size
switch
Flat screw
driver
Hooks
Upper cover
1-4-4
Screw
Screw
Screw
Right front cover
Figure 1-4-4
PWB cover
Knob
Figure 1-4-5
Screw