STEERING WHEELS A N D COLUMNS
384-1
3
COCK ASSY.
REMOVAC SLOT
\
TURN
S lGNAL
SW ITCH
/
Fig. 384-1 9 Location of Switch for Lock Removal
Fig. 384-20 lgnition Lock Removal
2. Install sector with large tooth of sector engaging large
tooth of rack. While holding sector in place, align flats of lock
drive shaft into sector. It may be necessary to tap lock drive
shaft into sector.
NOTE: Flange of sector must engage lock bolt as shown
in Fig. 3B4-27.
Fig. 384-2 1 Installing Ignition Lock
Fig. 384-22 Remove Key Warning Buzzer Switch
Fig. 384-23 Install Key Warning Buzzer Switch
3. Install snap ring as shown in Fig. 3B4-27.
4. Install lock bolt spring so that hook of spring engages
lock bolt (in slot at lower end of lock bolt) and loop fits into
slot in sector.
5. Position spring and install attaching screw (Fig. 3B4-
25). Move rack assembly downward until stop is felt.