This section tells you when to perform vehicle maintenance Customer Assistance Information This section tells you how to contact Pontiac for assistance and how to get service publications. It also gives you information on “Reporting Safety Defects’’ on page 8-4.
Canada; substitute “General Motors Canada Limited” for Pontiac Division whenever it appears in this manual. Please keep this manual in your Pontiac, so there you ever need when you’re on the road. If you sell the vehicle, please leave this manual in it so the new owner can use it.
How to Use This Manual Many people read their owner’s manual from beginning to end when they first receive their new vehicle. This will help you learn about the features and controls for your vehicle. In this manual, you’ll find that pictures and words work together to explain things quickly.
Vehicle Damage Warnings Also, in this book yo'u will find these notices: NOTICE: These mean there is something that could damage your vehicle. In the notice area, tell you about something that can your Many damage vehicle. times, this damage would not be covered by your warranty, and it could be costly.
Page 6
Vehicle Symbols These are some of the symbols you may find on your vehicle. For example, These symbols these symbols are important are used on an for you and original battery: your passengers whenever your vehicle is CAUTION driven: POSSIBLE INJURY PROTECT EYES BY...
Section 1 Seats and Restraint Systems Here you'll find information about the seats in your Pontiac and how to use your safety belts properly. You can also learn about some things you should not do with air bags and safety belts.
Page 9
the seat to unlock it. Slide the seat to where you want it. To make sure the seat is locked into place, release the lever and try move the seat with your body. To raise the driver’s seat, pull up the lever on the right side of the seat.
Driver's 6-Way Power Seat (Option) . - . . To adjust the driver's six-way power seat: Front Control (A): Raise the front of the seat by holding the switch up. Hold the switch down to lower the front of the seat. ( B ) : Move the seat forward or backward Center Control...
But don’t have a seatback reclined if your vehicle is moving. Head Restraints Slide the head restraint up or down so that the top restraint is closest to the top of your ears. This position reduces the chance of a neck injury in a crash. The head restraints tilt forward and rearward also.
Bench Seat If you have a rear bench seat, the seatback can be folded down. The bench seat can also be removed or moved to a different floor location to provide extra storage space. Folding the Seatback To fold down the seatback, lift the seatback latch release while folding the seatback forward.
Replacing the Bench Seat Don’t put the bench seat in so it faces backward, because it won’t latch that way. If you want more storage room behind the seat, use the floor pins closer to the front of the vehicle. See “Adjusting Rear Seats” later in this section.
Page 14
4. Lift the seatback latch release until it locks upright. 5. Rush and pull on the seatback to check that it is locked. raise seatback...
Page 15
Removable Rear Bucket Seats (Option) ’ FRONT- There are thee types of rear bucket seats: RIGHT ONL,Y, CENTER OR LEFT and LEFT ONLY RIGHT ONLY and LEFT ONLY seats may be equipped with the built-in child restraint option. rear bucket seats can be removed to provide extra storage.
Page 16
Dump and Stow Feature The second and third row bucket seats have been designed allow them to fold fully upward and forward when the seats are anchored in the rear-most position. This design improves both luggagekargo capacity and rear seat entry/exit. To use this feature on RIGHT ONLY seats: Lift upper lever to fold the seatback forward.
Page 17
Entry to Third Row Bucket Seats The RIGHT ONLY seats have a lower lever to tilt the seat forward. To get into third row seats, push back the lower lever on the RIGHT ONLY seat (nearest the sliding door) and tilt the seat forward completely. To return the seat to its normal position, pull the seat back, holding the lower lever back.
Page 18
Removing Rear Bucket Seats Removing the RIGHT ONLY Seats 1. Lift the upper lever to fold the seatback forward. 2. Push the lower lever back and tilt the entire seat and seatback forward. 3. From behind the seat, support the top portion of the seat with one hand as you squeeze the front release bar toward the crossbar.
Page 19
Removing LEFT ONLY and CENTER OR LEFT Seats 2. Push down on the rear release bar (located behind the seat), and tilt the entire seat forward. 1. Lift the upper lever to fold the seatback forward.
From behind the seat, support the top portion seat with one hand as you squeeze the front release bar toward the crossbar. The seat will release from the floor pins. Adjusting Rear Seats Each rear seat location has two sets of floor pins. Seats equipped with the built-in child restraint option must be secured in the rear set of floor pins.
Page 21
Replacing Rear Bucket Seats ADDITIONAL INFORMATION. owcdwlmo Follow the diagram on the back of the seats to replace the seats in their proper location. The LEFT ONLY seats fit only in the left positions. The RIGHT ONLY seats fit only in the right positions. CENTER OR LEFT seat fits the center position and in either left position.
Page 22
1. With the entire seat tilted forward, place the front hooks of the seat latch onto the front floor pins. Firmly press the rear hooks onto the rear floor pins. The seat should lock into position. Push and pull on the seat to check that it is locked. Lift the upper lever and pull up on the seatback until it locks upright.
Safety Belts: They’re for Everyone This part of the manual tells you how to use properly. It also tells you some things you should not do with safety belts. And it explains the Supplemental Restraint System, or “air bag” system. 1-16 safety belts...
Why Safety Belts Work in or When ride on anything, fast as it goes. someone on it Take the simplest vehicle. Suppose it's just a seat on wheels. 1-17...
Page 25
Get it up to speed. Then stop the vehicle. The rider doesn’t stop. 1-18 The person keeps going until stopped In a real vehicle, it could be the windshield something.
Page 26
or the instrument panel or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, strongest bones take the forces. That’s why and your safety belts make such good sense. 1-19...
Here Are Questions Many People Ask About Safety Belts and the Answers Won’t I be trapped in the vehicle after an accident if I’m wearing a safety belt? You could whether you’re wearing a safety belt or not. But you can unbuckle a safety belt, even if you’re upside down.
Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and babies. If a child will be riding in your Pontiac, see the part of this manual called “Children.” Follow those rules for everyone’s protection.
Page 29
If the belt stops before it reaches the buckle, tilt the latch plate and keep pulling until you can buckle the belt. Pull up the latch plate to make If the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 30
The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 31
What's wrong with this? The shoulder belt is too loose. It won't give nearly as much protection this way. 1-24...
Page 32
What's wrong with this? The belt is buckled in the wrong place. 1-25...
Page 33
What’s wrong with this? The belt is over an armrest. 1-26...
Page 34
What's wrong with this? The shoulder belt is worn undei the arm. It should be worn over the should'er times. 1-27...
Page 35
wrong What’s with this? m o s s The belt is twisted the body. 1-28...
Supplemental Restraint System (SRS) This part explains the Supplemental Restraint System (SRS), or air bag. Your Pontiac has an air bag for the driver. Here are the most important things to know about the air bag system: 1-29...
There is an air bag readiness light on the instrument panel, which shows the words AIR BAG. The system checks AIR BAG the air bag’s electrical system for malfunctions. The light tells you if there is an electrical problem. See “Air Bag Readiness Light”...
Page 38
When should an air bag inflate? The a i r bag is designed to inflate in moderate to severe fiontal or near-frontal crashes. The the impact speed is above the system’s designed “threshold level.” If your vehicle goes straight into a wall that doesn’t move or deform, the threshold level is about 9 to 15 mph (14 to 24 The threshold level can vary,...
Page 39
What will you see after an air bag inflates? After the air bag inflates, it quickly deflates. This occurs so quickly that some people may not even realize the air bag inflated. Some components of the air bag module in wheel hub will be hot for a short time, but steehng the part of the bag that comes into contact with you will...
You don’t want the system to inflate while someone is working on your vehicle. Your Pontiac dealer and the 1995 Trans Sport Service Manual have information about servicing your vehicle and the air bag system. To purchase a service manual, see “Service Publications”...
The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it’s more that fetus won’t be hurt in a crash. For likely pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
Page 42
Pick up the latch plate and pull the belt across you. Don’t let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly.
Page 43
3. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder part. 1-36 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones.
Page 44
The safety belt locks if there's a sudden stop or a crash, if you pull the belt very quickly out of the retractor. To unlatch the belt, just push the button on the buckle. 1-37...
Center Passenger Position (Bench S'eat) Lap Belt If your vehicle has a rear bench seat, someone can sit in the center position. 1-38 When you sit in the center position of the bench seat, you have a lap safety belt, which has no retractor. To make the belt longer, tilt the latch plate and pull it along the belt.
To make the belt shorter, pull its free end as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap-shoulder belt. If the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 47
When you sit in the center position bucket seat, you have a lap safety belt which has a retractor. 1. Pick up the latch plate and, in a single motion, pull the belt across you. Don’t let it get twisted. 2.
rnoz TO HELP AVOID PERSONAL INJURY. SECURELY LATCH SEAT IN LOCATION SHOWN. -- I INFORMATION. ADDITIONAL @ W a E I p l W C The center position bucket seat is a CENTER OR LEFT type seat. Because it is the only bucket seat with belt, and has a buckle on only one side, there are certain places a CENTER OR LEFT type bucket seat should, and should not, be used.
Built-In Child Restraint (Option) Each seat that has the built-in child restraint option fits in only one location in your vehicle. To find out where a seat that has a built-in child restraint must be located in your vehicle, see “Removable Rear Bucket Seats” in the Index. If you have a rear seat with the optional built-in child restraint, refer to this picture to become familiar with the parts of each child seat and 5-point harness listed next.
Page 51
To make sure that the child is tall enough, compare the child’s standing height to the top surface of the bucket seat, which is about 29 inches (74 cm) from the floor. 1-44 The booster seat can be used by children over 40 pounds (1 8 kg) or whose shoulders are above the shoulder belt anchorages of the 5-point child restraint harness.
Page 52
WARNING! FAILURE TO FOLLOW THE MANUFACTURER’S INSTRUCTIONS ON THE USE OF THIS CHILD RESTRAINT SYSTEM CAN RESULT IN YOUR CHILD STRIKING THE VEHICLE’S INTERIOR DURING A SUDDEN STOP OR CRASH. SNUGLY ADJUST THE BELTS PROVIDED WITH THIS CHILD RESTRAINT AROUND YOUR CHILD. Just like the other restraint systems in your vehicle, your built-in child restraint needs to be periodically checked and may need to have parts replaced after a crash.
Page 53
2. Lower the child restraint cushion. 3. Before placing the child in the child restraint, add slack to the shoulder harness. Pull the black shoulder harness release strap firmly. At the same time pull both shoulder harness straps through the slots in the seatback as shown.
Page 54
Be sure that the seat belt buckle is free of foreign objects that may prevent you from properly latching the latch plates. If an object is in the opening, see your Pontiac dealer for service before using the child restraint. 1-47...
Page 55
6 . Fasten the two halves of the shoulder harness d i p together and put it two to three inches (5-8 cm) below the child’s chin. The purpose of the clip is to keep the shoulder harness straps positioned correctly on the shoulders.
Page 56
To Store the Built-In Child Restraint I. Make sure that the crotch strap child restraint cushion with the fastener strip. Also be sure the shoulder harness adjustment strap (gray) is folded up in the seat. This will allow the cushion to fold completely into the seatback.
Page 57
To Use Booster Seat as a P u l l the head restraint release strap and raise head restraint until you hearthe latch click. 1-50 2. Lower the child restraint cushion.
Page 58
3. Store the 5-point child restraint harness behind the 4. Place the child on the cushion and fasten the vehicle removable pad. The pad is held in place by fastener lap-shoulder belt around the child. strips. 5. To release the child from vehicle lap-shoulder belt, push the red button on the buckle.
Child Restraints Be sure to follow the instructions for the restraint. You may find these instructions on the restraint itself or in a booklet, or both. These restraints use the belt system in your vehicle, but the child also has to be secured within the restraint to help reduce the chance of personal injury.
Page 60
Pontiac dealer to put it in for you. If you want to install an anchor bracket yourself, your dealer can tell you how to do it.
Page 61
Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. Tilt the latch plate to adjust the belt if needed. If the shoulder belt goes in front of the child’s face or neck, put it behind the child restraint.
Page 62
Securing a Child Restraint in the Center Seat Position (Bench Seat) You’ll be using the lap belt. See the earlier part about the top strap if the child restraint has one. 1. Make the belt as long as possible by tilting the latch plate and pulling it along the belt.
Page 63
1-56 5. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 6. To tighten the belt, pull its free end while you push down on the child restraint.
Page 64
Securing a Child Restraint in the Center Seat Position (Bucket Seat) You’ll using the lap belt. See the earlier part about the top strap if the child restraint has one. 1. Put the restraint on the seat. Follow the instructions for the child restraint.
Page 65
Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly ever had to. if you 1-58 6. To tighten the belt, feed it back into the retractor while you push down on the child restraint. 7.
Larger Children Children who have outgrown child restraints should wear the vehicle’s safety belts. have the choice, a child should sit next to a window so the child can wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. Accident statistics show that children are safer if they are restrained in the rear seat.
Page 67
1-60 What if a child is wearing a lap-shoulder but the child is so small that the shoulder belt is very close to the child’s face or neck? Move the child toward the center of the vehicle, but be sure that shoulder belt still is on the child’s shoulder, so that in a crash the child’s upper body would have the restraint that belts provide.
Page 68
Wherever the child sits, the lap portion of belt should be worn low and snug on the hips, just touching the child’s thighs. This applies belt force to the child’s pelvic bones in a crash. 1-61...
Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough dealer will order you an extender. It’s free. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you.
Replacing Seat and Restraint System Parts After a Crash you’ve had a crash, do you need new safety belts or built-in child restraint parts? After a very minor collision, nothing may be necessary. But if the safety belts or built-in child restraint harness straps were stretched, as they would be if worn during a more severe crash, then you need new safety belts or harness straps.
Section 2 Features and Controls Here you can l e a n about the many standard and optional features on your Pontiac, and information on starting, shifting and braking. Also explained are the instrument panel and the warning systems that tell you if...
Page 73
NOTICE: Your Pontiac has a number of new features that can help prevent theft. But you can have a lot of trouble getting into your vehicle if you ever lock your keys inside.
Page 75
To lock the door from the inside, slide the locking lever rearward. To unlock the door, slide the locking lever forward. Power Door Locks (Option) From the inside, press the front of the power door lock switch (on either front door) to unlock all doors and the liftgate.
Page 76
If you have the optional Remote Keyless Entry system, your vehicle has a special security feature. If the driver’s door is open and your key is in the ignition in the OFF position, you won’t be able to set the door locks with the power door lock switch or the remote transmitter.
Page 77
Overriding Lock Relay override the lock delay feature, press the front of the power door locks switch (the unlock position) while the (P). shift lever is in PARK you have the Remote Keyless Entry system, there are three additional ways you can disable the lock delay feature (see “Remote Keyless Entry”...
Then get out and close the door. Remote Keyless Entry (Option) If your Pontiac has this option, you can lock and unlock your doors and liftgate from up to 30 feet (9 m) away using the key chain transmitter supplied with your vehicle.
Check the distance. You may be too vehicle. This product has a maximum range. Check the location. Other vehicles or objects may be blocking the signal. See your Pontiac dealer or qualified technician for service. Changes or modifications to this system by other than an...
Page 80
If any door is open when you press the lock symbol or the rear of either power door lock switch, a chime will sound three times. This indicates that all doors and the liftgate will lock about five seconds after the last door has been closed.
Matching Transmitter(s) To Your Vehicle Each key chain transmitter is coded to prevent another transmitter from unlocking your vehicle. If is lost or stolen, a replacement can be purchased through your dealer. Remember to bring any remaining transmitters with you when you go to your dealer. When the dealer matches the replacement transmitter velucle, the remaining transmitters must also be matched.
3. Remove and replace the %volt battery (CR2032). Reassemble the transmitter. Check the transmitter operation. Illuminated Entry System (Option) This option comes with the optional Remote Keyless Entry system. When you open the driver's door, by itself or in combination with any passenger door or the liftgate, the interior lamps will come on and then gradually dim to off 10 seconds after the last door is closed.
To move the door forward, must first pull the inside or outside latch release out and then forward or the door will remain latched in the open position. 2-12 Sliding Door Lock Lock the sliding door from inside the vehicle by moving the manual locking lever down.
Page 84
Power Sliding Door (Option) With this option, you can open and close the sliding door with switches inside your vehicle. If you have optional Remote Keyless Entry system, you can also operate the sliding door with your remote transmitter. See “Remote Keyless Entry” in the Index. To operate the power sliding door, the power sliding door enable switch must be in the ON position.
Page 85
To open or close the sliding door, press and release one of two PWR DOOR switches. One is mounted on the wall, just in front of the sliding door. The other switch is located between reading lamps on the compact overhead console.
Page 86
anything obstructs the power sliding door while it is closing, the door will automatically reverse to the open position, provided it meets sufficient resistance. Resistance must be as strong as the force of the closing door, or stronger. The force of the closing door increases significantly as the door approaches the latch position.
Page 87
2-16 To m u a I l y close the power sliding door when the ON p s i t i a n , door enable door switch is in inside or outside latch release or the edge of the door. Move the &or about foar inches toward the...
Page 88
Sliding Door Child Security Lock Your Pontiac is equipped with a sliding door child security lock that helps prevent young children or other passengers from opening the sliding door from the inside. If you have the optional power sliding door, you can...
Page 89
If you want to open the sliding door when the security lock is on, unlock the sliding door from the inside and open the door from the outside. 2-18 If you have the optional power sliding door, slide the power sliding door enable switch to the ON position. Press either PWR DOOR switch.
Liftgate Lock To unlock the liftgate, insert the door key and turn the lock clockwise. The liftgate will automatically lock when you close it. If you have optional power door locks or the Remote Keyless Entry system, the liftgate will lock and unlock differently.
Page 91
To close the liftgate, pull down on the strap, then firmly shut the liftgate. Don’t drive with slightly. See “Exhaust” in the Index. A light on your instrument panel will warn you if the liftgate is completely closed (see “Liftgate Ajar Warning Light” in the Index).
Page 92
“Fuses and Circuit Breakers” in the Index. Theft Vehicle theft is big business, especially in some cities. Although your Pontiac has a number of theft deterrent features, we know that nothing we put on it can make it impossible to steal.
-- so don’t do it. When you park your Pontiac and open the driver’s door, you’ll hear chime reminding you to remove your key from the ignition and take it with you. Always do this.
Ignition Switch ACCES With the ignition key in the ignition switch, you can turn the switch to five positions: ACCESSORY: An ON position in which you can operate your electrical power accessories. Press in the ignition switch as you turn the top of it toward you. LOCK: The only position in which you can remove the key.
To restart when you’re already moving, use NEUTRAL (N) only. NOTICE: Don’t try shift to PARK (P) if your Pontiac is moving. If you do, you could damage the transaxle. Shift to PARK only when your vehicle is stopped.
Page 96
To Start Your 3.1L V6 Engine Without pushing the accelerator pedal, turn your ignition key to START. When the engine starts, let the key. The idle speed will go down as your engine gets warm. NOTICE: Holding your key in START for longer than 15 seconds at a time will cause your battery to be drained much sooner.
Page 97
To Start Your 3800 V6 Engine 1. Without pushing the accelerator pedal, turn your ignition key to START. When the engine starts, let go of the key. The idle speed will go down as your engine gets warm. NOTICE: your key in START €or longer than Holding 15 seconds at a time will cause your battery to be...
Driving Through Deep Standing Water NOTICE: If you drive too quickly through deep puddles or standing water, water can come in through your engine’s air intake and badly damage your engine. Never drive through water that is slightly lower than the underbody of your vehicle. If you can’t avoid deep puddles or standing water, drive...
NOTICE: After you’ve used the coolamt heater, be sure it was before to keep it away store the cord from moving parts. engine be damaged. long should you keep the coolant answer depends on the weather, the- you have, and some other things. Instead of~tryhg contact yourPontiac everything here, we ask that be parking...
Page 100
Ensure the shift lever is fully in PARK starting the engine. Your Pontiac has brake-transaxle shift interlock (BTSI). You must fully apply your regular brakes before you can shift from PARK ( I ? ) when the ignition key is in the RUN position.
Page 101
If you cannot shift out of PARK (P), the shift lever push the shift lever all the way into PARK as you brake ( P ) maintain application. Then move the shift lever into the gear ( P ) ” “Shifting Out of PARK in this part.
Forward Gears AUTOMATIC OVERDRIVE (GO): transaxle has AUTOMATIC OVERDRIVE position is for normal driving. If you need more power for passing, and you’re: k m k ) , Going less than accelerator pedal about halfway down; Going about 35 mph (56 km/h) accelerator all the way down.
Page 103
THIRD GEAR (D): If your automatic transaxle does (D), not have OVERDRTVE this position is for normal driving, at all speeds, in most street situations. OVERDRIVE your automatic transaxle has THIRD (D) is like OVERDRIVE (@), but you never into Overdrive. Here are some times you might choose THIRD (D) instead of OVERDRIVE When driving on hilly, winding roads.
NOTICE: If your front wheels can’t rotate, don’t try to drive. This might happen if you were stuck in very deep sand or mud or were up against a solid object. You could damage your transaxle. Also, if you stop when going uphill, don’t hold your vehicle there with only the accelerator pedal.
need to apply about the same amount of pressure to the parking brake pedal as you did when you set the parking brake.) When you remove your foot from the parking brake pedal, it will up to the release position. NOTICE: Driving with the parking brake on can cause your rear brakes to overheat.
Page 106
2. Move the shift lever into the PARK (P) position like this: Pull the lever toward you. Move the lever up as far as 3. Move the ignition key to the LOCK position. 4. Remove the key and take it with you. If you walk away from your vehicle with the ignition key in your hand, your vehicle is in PARK (P).
Leaving Your Vehicle With the Engine Running If you have to leave your vehicle with running, be sure your vehicle is in parking brake is firmly set before you leave it. After you’ve moved the shift lever into position, hold the regular brake pedal down. Then, see if move the shift lever away fram PARK (P) without first pulling it toward you.
Shifting Out of PARK (P) Your Pontiac has brake-transaxle shift interlock (BTSI). You have to fully apply your regular brake before you can shift from PARK (P), when the ignition is in the RUN position. See “Shifting the Automatic Transaxle”...
Engine Exhaust Running Your Engine While You’re Parked It’s better not to park with the engine running. But if you ever have to, here are some things to know. 2-38...
Follow the proper steps to be sure your vehicle won’t move. See “Shifting Into PARK (P)” in the Index. If you’re pulling a trailer, see “Towing a Trailer” in the Index. Manual Windows crank the manual to open and win’dows. Power Windows (Option) If you have power windows, the switches on the driver’s door armrest control the front windows (when the ignition...
Page 111
The driver’s power window switch has two down positions. Hold the rear of the switch the window normally. to lower To activate the auto down feature, fully press the rear of the switch, then release. The window will lower completely. To stop the window from lowering all the way, press the front of the switch.
Tilt Steering Wheel (Option) A tilt steering wheel allows you to adjust the steering wheel before you drive. You can also raise it to the highest level to give your legs more room when you exit and enter the vehicle. the wheel, hold the steering wheel and pull the tilt lever.
Turn Signal and Lane Change Indicator The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. To signal a turn, move the lever all the way up or down. When the turn is finished, lever will return automatically.
Windshield Wipers The windshield wiper and washer controls are located to the right of the instrument cluster. For a single wiper cycle: Press the switch marked MIST and release. For more cycles, press and hold the switch. For pulse delay wiper cycles: The pulse delay cycle system allows you to set the wiper speed as slow as 20 seconds between cycles, or faster.
Windshield Washer 2-44 To wash your windshield, press and hold the windshield washer switch. The washers and wipers will operate. When you release the switch, the washers will stop, the wipers will continue to operate for two cycles, unless your wipers had already been on. In that case, the wipers will resume the wiper speed you had selected earlier.
NOTICE: When using concentrated washer fluid, follow the manufacturer’s instructions for adding water. Don’t mix water with ready-to-use washer fluid. Water can cause the solution to freeze and damage your washer fluid tank and other parts of the washer system. Also, water doesn’t clean as well as washer fluid.
Cruise Control (Option) OFF ON RESUME cruise control, you can maintain a speed of about 25 mph (40 or more without keeping your foot on km/h) the accelerator. This can really help on long trips. Cruise control does not work at speeds below abmt 25 mph (40 km/h).
To Set Cruise Control 1. Move the cruise control switch to ON. RESUME ACCEL E r l CRUISE 2. Get up to the speed you want. 3. Push in the set button at the end of the lever and release 4.
Page 119
To Resume a Set Speed Suppose you set your cruise control at a desired speed and then you apply the brake. This, of course, shuts off the cruise control. But you don’t need to reset it. Once you’re going about 25 mph (40 km/h) or more, you can move the control switch from ON to...
Page 120
Here’s the second way to go to a higher speed: Move the cruise switch from there until you get up to the speed you want, and then release the switch. To increase your speed in very small amounts, move the switch to R/A for less than half a second and then release it.
Page 121
Headlamps 2-50 Push this switch to turn on: Parking Lamps Sidemarker Lamps Taillamps Instrument Panel Lamps Pull the switch to turn off the lamps. - ' Q - Push this switch to turn on the headlamps, together with: Lamps Parking Sidemarker Lamps Taillamps Instrument Panel Lamps...
Instrument Panel Intensity Control Slide the upper lights control all the way up to increase the brightness of the instrument panel lamps, down decrease the brightness. Slide the control all the way down to turn them off. Daytime Running Lamps (Canada Only) Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day.
Headlamp High-Low Beam Changer To change the headlamps from high to low beam, or low to high, simply pull the turn signal lever all the way toward you. Then release it. When the high beams are on, a blue light on the instrument cluster will also be on.
Page 124
Overhead Console (Option) The optional front overhead console has reading lamps, two switches for the optional power sliding door, storage compartments, including one for your garage door opener and one for sunglasses, a compass and an outside temperature display. The features of the optional overhead console are explained on the following pages.
Page 125
3. To make sure the button on your garage door opener is centered above the button on the compartment door, use the intersecting lines on the Velcro@ inside the compartment a guide. Center the button of your garage door opener over where the lines interseat, press the opener firmly into place.
Page 126
TEMPERATURE AND COMPASS DISPLAY: outside air temperature and the compass are displayed at the front of the overhead console. The control switches are located to the left of the display. Turn display pressing off by switch. Display the temperature in either degrees Fahrenheit (English) or Celsius (metric) by pressing the USMET switch.
Page 127
Compass Variance: Variance is the difference between magnetic north and geographic north. In some areas the difference between the two can be great enough false compass readings. If this happens, follow these 2-56 instructions to set the variance for your particular location: Determine your location on the zone map.
Compact Overhead Console The front overhead console includes two reading lamps and a storage compartment. To turn either reading lamp on or off, press the switch next to it. If you have the optional power sliding door, your overhead console will also have two power sliding door switches.
Rear Interior Lamps The rear dome lamp also has two reading lamps. 2-58 The dome lamp will on each time you open the doors, unless you turn the interior lights override switch in the center instrument panel console to OFF. To turn on either reading lamp, press the switch to it.
Interior Lights Override Switch This switch is located to the left of the cigarette lighter in the center instrument panel console. It has two positions, DOOR (on) and OFF, and overrides all interior lamps except the reading lamps. The interior lamps go on each time you open the doors. You can turn off these lamps so that the doors may be left open without running down the battery by turning the interior lights override switch to OFF.
Page 131
The power outlet can be used to plug in electrical equipment such as a cellular telephone, CB radio, etc. Follow the proper installation instructions that are included with any electrical equipment you install. When not in use, always cover the outlet with the protective cap.
Convex Outside Mirror Your passenger’s side mirror is convex. A convex mirror’s surface is curved so you can see more from the driver’s seat. Manual Remote Control Mirrors The outside rearview mirror should be adjusted so you can just see the side of your vehicle when you are sitting in a comfortable driving position.
Page 133
Power Remote Control Mirrors (Option) 2-62 The control on the driver’s door controls both outside rearview mirrors. Turn the control to the left to select the driver’s side rearview mirror, or to the right the passenger’s side rearview mirror. Then use the control to adjust each mirror so that you can just side of your vehicle when you are sitting in a comfortable driving position.
Convenience Net (Option) The optional convenience net is designed to help keep small loads, like grocery bags, from falling over during sharp turns or quick stops and starts. Install the convenience net at the rear of your vehicle, just inside the liftgate. Attach the upper loops to the posts on either side of the liftgate opening (the label on the net should be in the upper right-hand corner).
Luggage Carrier (Option) If you have the optional luggage carrier, you can load things on top of your vehicle. The luggage carrier has slats and side rails attached to the roof, as well as sliding crossrails and places to use for tying things down. These let you load some things on top of your as they are not wider or longer than the luggage carrier.
Page 136
You can then tie it down. Don’t exceed the maximum vehicle capacity when loading your Pontiac. For more information on vehicle capacity and loading, see “Loading Your Vehicle” in the Index. To prevent damage or loss of cargo as you’re driving, check now and then to make sure the luggage carrier and cargo are still securely fastened.
Page 137
Reposition the tiedowns by turning them counterclockwise, then slide them along the side rail. Turn the hedowns clockwise to tighten them in place. Tiedowns may be removed and used in the adjustable tapped plates in the crossrails. You may also use these tapped plates to secure bicycle or ski racks.
Page 138
The air inflator kit is stored in a pouch in the glove box or, if you have optional saddlebags, in the driver's side saddlebag. It includes a 20-foot air pressure gage, nozzle adapters and instructions. (6 m) hose with an To use your air inflator system, attach the appropriate nozzle adapter, has the pressure gage.
Your air inflator will automatically shut 10 minutes. To reset, press the ON switch again. Don’t run your air inflator for longer than 30 minutes at one time. If you do, you may damage the system. After minutes, wait at least minutes before restarting the air inflator.
Page 140
CupholderdAshtrayLighter Two cupholders, an ashtray and a lighter are located in the center instrument panel console. The foam cupholder liners can Should the liners ever become damaged, see your dealer for replacement. To use the ashtray, lift the lid. remove the ashtray grasp the rear edge of the ashtray with your fingertips and pull up and out, in a rocking motion.
Page 141
Side Ashtrays To open the ashtray, press the right side and turn it open. 2-70 To remove the ashtray for cleaning, press the snuffer as lift up the bottom of the ashtray. If you have the optional rear climate control, your side will have flip-up ashtray...
Locking Storage Bin At the base of the center instrument panel console is a storage bin. Use the door key to lock open the bin, pinch the latch release. Inside the bin, you will find a coinholder. To remove the bin for cleaning, open it part way, then pull out and slightly up.
Page 143
Saddlebags (Option) The optional saddlebags provide extra storage space. They are located at the rear of your vehicle, attached to the covers on the two rear compartments. 2-72 Electronic Level Control (Option) With this option, the rear of the vehicle automatically adjust to changes in load weight.
Sunroof (Option) The sunroof has a glass panel that opens for ventilation. To open the sunroof, pull down on the latch release handle and then push it forward and up until the glass panel locks into place. To close the sunroof, pull the latch release handle forward and down, then push it back firmly to lock the latch release handle into the closed position.
(used in the United States) or kilometers (used in Canada). Tamper Resistant Odometer Your Pontiac has a tamper resistant odometer. If you see silver lines between the numbers, you’ll know that someone has probably tried to turn it back, so the numbers may not be true.
Tachometer ‘2 The tachometer displays the engine speed in revolutions per minute (rpm). NOTICE: Do not operate the engine with the tachometer the red area, or engine damage may occur. 2-78 Trip Odometer 1 2 0 UNLEADED FUEL The trip odometer can tell you how far your vehicle has been driven since you last set it to zero.
Warning Lights, Gages and Indicators This part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement.
Readings in either red zone indicate a possible problem with your charging system. Have your Pontiac serviced immediately. When the engine is not m i n g but the ignition is on (in the Rmposition), the display measures the voltage output of your battery.
Brake System Warning Light Your Pontiac’s hydraulic brake system is divided into two parts. [BRAKE] If one part isn’t working, the other part can still work and stop you. For good braking, though, you need parts working well. If the warning light comes on, there could be a brake problem.
Then start the engine again to reset system. If while you’re driving, your Pontiac needs service. I f the light is c m but not flashing: warning light isn’t on, don’t have-anti-lock...
Page 154
Traction Control System Warning Light (Option) This warning light should come on briefly as you start the engine. If the warning light doesn’t come on then, have it fixed so it will be ready to warn you if there’s problem. If it stays on, or comes on when you’re driving, there may be a problem with your traction control system and your vehicle may need service.
The LOW TRACTION light also comes on briefly, as a bulb check, when the engine is started. If the light doesn’t come on then, have it fixed so it will be there to tell you when the system is active. Engine Coolant Temperature Gage This gage shows the engine coolant temperature.
Page 156
NOTICE: If you keep driving your vehicle with this light on, after a while the emission controls won’t work as well, your fuel economy won’t be as good and your engine may not run as smoothly. This could lead to costly repairs not covered by your warranty.
Page 157
Driving your vehicle with low oil pressure can cause extensive engine damage. Have your vehicle serviced immediately. NOTICE: Damage to your engine from neglected oil problems can be costly and is not covered by your warranty. 2-86 Oil Pressure Gage (3800 V6 Engine) Your oil pressure shows the oil pressure ' I / ,...
Driving your vehicle with low oil pressure can cause extensive engine damage. Have your vehicle serviced immediately. NOTICE: Damage to your engine from neglected problems can be costly and is not covered by your warranty. Liftgate Ajar Warning Light The liftgate ajar symbol on your instrument panel will come on if your liftgate is not completely closed.
Page 159
Power Sliding Door Warning Light With the optional power sliding door, the sliding door ajar light w i l l come on if your sliding door is not completely closed. If you shift the transaxle out of PARK (P) while the sliding door is open or in the process of closing, and the power sliding door enable switch is in the ON position, the sliding door ajar light will flash and a buzzer will...
Low Fuel Warning Light , , \ When there is between 3 gallons (11 liters) and 0.5 gallon (1.8 liters) of fuel left in the tank, the fuel symbol will go on. This light will also come on when you turn on the ignition, but the engine is not running, to show you it is working.
Page 161
Here are four things that some owners ask about. None of these show a problem with your fuel gage: At the service station, the gas pump shuts off before FULL (F). the gage reads It takes a little more or less fuel to fill up than the gage indicated.
Section 3 Comfort Controls and Audio Systems In this section you’ll find out how to operate the comfort control systems and audio systems offered with your Pontiac. Be sure to read about the particular system supplied with your vehicle. Heater and Ventilation System HI G H Your vehicle’s heater will work best if you keep your...
Page 165
UPPER: This setting brings in outside air through the instrument panel outlets. You may warm the air using the temperature control lever. BI-LEV: This setting is designed for use on sunny days, when the air is only moderately warm or cool. On days like these, the sun may adequately warm your upper body, but your lower body not be warm enough.
Page 166
area around the base of the center Please keep the instrument panel console and the area between and the front seats free of objects that could obstruct under airflow to the rear. The control for the rear fan is located below the audio system.
If you have the optional engine coolant heater and use it during cold weather, 0°F C ) or lower, your heating system will provide heat more quickly because the engine coolant is already warmed. See “Engine Coolant Heater’’ in the Index. OFF: Press this button to turn the system off.
Directional Controls RECIRC: Press to get maximum cooling or quick cool-down on very hot days. This setting recirculates much of the air inside your vehicle. It should not be used for long periods of time because the air may become too cold and dry. Slide the temperature control lever down to the coolest setting and adjust the fan speed, as desired.
Page 169
Rear Fan If your vehicle is equipped with seats in the third row, you will have a rear air outlet and maximize airflow to the rear of your vehicle, place the left second row bucket seat in the forward position (see “Adjusting Rear Seats”...
Page 170
Rear Climate Control (Option) If you have this option, you will have a master control for the rear fan on the center instrument panel console, and a rear control next to the second row seat, on the driver’s side of the vehicle. To maintain a comfortable temperature in the rear, use either rear fan control to adjust the force of air corning through the rear outlets.
Page 171
\ \ . Rear Air Vents: To maximize airflow through the rear heater outlet, place the left second row bucket seat or the bench seat in the forward position (see “Adjusting Rear Seats” in the Index). The vent forward of the rear heater outlet is the cold air vent.
Page 172
Rear Fan Rear Control: This feature allows passengers riding in the rear seats to control the the rear area the vehicle. The rear control switch is located on the armrest, next to the second row seat, left position. The rear fan master control on the instrument panel must be in the position for the rear control switch to operate.
Defogging and Defrosting rapidly defrost the windshield, slide the temperature control lever all the way to WARM Adjust the fan to the highest speed. keep the windshield clear and bring through the heater ducts, press MIX. When the temperature outside is above freezing, the run in conditioner compressor will air.
This helps air to circulate throughout your vehicle. Audio Systems The following pages describe the audio systems available for your Pontiac, and how to get the best performance from them. Please read about the system in your vehicle. Setting the Clock For radios with SEEK 1.
AM/FM Stereo Radio B A S S The digital display indicates informalion an time radio station frequency, the AM or whether the station is in stereo, md other radio functions. 3-12 Playing the Turn the upper (your ignition must be on). counterclockwise to VOL: Once the system is on, turn the upper knob...
Page 176
SEEK Press the up down or lower the next higher station. The sound will be muted while seelung. You can also use the SEEK arrow buttons to scan radio stations up or down the To scan stations up the band, press and hold the up arrow button, then press the ‘down arrow button, then release both buttons.
Page 177
AM/F” Stereo with Cassette Player (Option) AM-FM To play the radio, follow the instructions earlier in this manual under “AM/FM Stereo Radio.” 3-14 To Play a Cassette Tape With the power switch on, insert door. Do not use tapes that are longer than 90 minutes (45 minutes on each side).
Page 178
AM/FM Stereo with Cassette Player and Graphic Equalizer (Option) Playing the Radio Press PWR to turn the system on and off. VOL: Turn the upper knob clockwise to increase volume. Turn it counterclockwise to decrease volume. MUTE: Press the upper knob mute the radio or tape player.
Page 179
To Preset Radio Stations five pushbuttons under the cassette entry door can be used to preset up to 15 radio stations (five AM, five EM1 and five FM2). The buttons have other uses when “To you are playing tape (see Play a Cassette Tape”...
Page 180
To Play a Cassette Tape Press PWR to turn the radio on. The radio will play until a cassette is pushed into the cassette entry door (the tape side goes in first). Do not use tapes that are longer than 90 minutes (45 minutes on each side).
Page 181
AMI/FM Stereo with Compact Disc Player and Graphic Equalizer (Option) M U T E V O L FAD^ B A N D T U N E Playing the Radio turn Press PWR to the system on and off. VOL: Turn the upper knob clockwise to increase volume.
Page 182
To Preset Radio Stations The five numbered pushbuttons can be used to preset up radio stations (five AM, five The buttons have other uses when you are playing a compact disc (see “To Play a Compact Disc” later in this section).
Page 183
To Play a Compact Disc Many of the controls for the radio also have functions for the compact disc player, as explained here. Don’t use mini-discs that are called singles. They won’t eject. Use only full-size compact discs. 1. Press PWR to turn the radio on. 2.
When Finished with the Compact Disc Player you press PWR or turn off the ignition, the disc will stay in the player and start again when you turn on the ignition or power switch. The disc will begin playing the point where it had been stopped. ST-PL: Press this button to stop the disc player;...
Page 185
and 7 for the last three digits of your Repeat steps code. lower knob 10. Press the and “rEP” will appear for five seconds and then “000” will appear. 11. Repeat steps 6-10. This time SEC will appear, indicating that the radio is secure. the steps were not successful and you must repeat the entire procedure.
Page 186
Steering Wheel Touch Controls (Option) You can control certain audio system functions using the your steering wheel. buttons on VOLUME: Press the up or down arrows to increase or decrease volume. PLAY Press to play the CD or cassette instead of the radio.
Page 187
Hearing damage from loud noise is almost undetectable until it is too late. Your hearing can adapt to higher volumes o f sound. Sound that seems norrnal Take and harmful to your hearing. adjusting the volume control on your radio to a safe sound level before your hearing adapts to it.
It is normal for the cartridge eject while cleaning. Insert least three times to ensure thorough cleaning. A not. scrubbing action, cleaning cassette is available through your Pontiac dealershin cassette 3-25...
may also choose a non-scrubbing action, wet-type cleaner which uses a cassette with a fabric belt to clean the tape head. This type of cleaning cassette will not eject.It may not clean as thoroughly as the scrubbing type cleaner. Cassettes are subject to wear and the sound quality may degrade over time.
Page 190
NOTICE: Don’t mount anything to your roof or headliner, such as an antenna or a luggage carrier. puncture the roof or headliner, you could damage or destroy your integrated roof antenna. Have any work of this type done by your dealer. you want to add a mobile phone or a two-way radio to your vehicle, there are special precautions you’ll need to take.
The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your Pontiac: Buckle up. (See “Safety Belts” in the Index.) Defensive driving really means “be ready for anything.” On city streets, rural roads, or freeways, it means “always expect...
Drunken Driving Death and injury associated with drinking and driving is a national tragedy. It’s the number one contributor to the highway death toll, claiming thousands of victims every year. Alcohol affects four things that anyone needs to drive vehicle: Judgment Muscular Coordination Vision...
Page 194
It’s the amount of alcohol that counts. For example, if the same person drank three double martinis (3 ounces or 90 of liquor each) within an hour, the person’s BAC would be close to 0.12 percent. A person who consumes food just before or during drinking will have a somewhat lower BAC level.
Page 195
The body takes about an hour to rid itself in one drink. amount of coffee or number of cold showers. will speed that up. ‘ T U be careful” isn’t the right answer. if there’s an emergency, a need to What take sudden action, as when child darts into the street?
Control of a Vehicle You have three systems that make your vehicle you want it to go. They are the brakes, the steering and the accelerator. All three systems have to do their work at the places where the tires meet the road. Sometimes, as when you’re driving on snow or ice, it’s ask more of those control systems than the tires...
Once the power assist used may take longer stop will be harder to gush. Anti-Lock Brakes (ABS) heavy Your Pontiac that will help prevent a braking shd. your engine the brake pedal an advanced electronic braking system...
Page 198
This light on the instrument panel will come on briefly When you start your vehicle, or when you begin to drive away, you may hear a momentary motor or clicking noise. And you may even notice that your brake pedal moves while this is going on.
Page 199
The anti-lock system can change the brake pressure faster than any driver could. The computer is pg-ammed to make the most of available tire conditions. You can steer around the obstacle while braking hard. As you brake, your computer keeps receiving updates on wheel speed and controls braking pressure accordingly.
Page 200
Traction Control System (Option: 3800 V6 Engine) Your vehicle may have a traction control system that limits wheel spin. This is especially useful in slippery road conditions. The system operates only if it senses that one or both of the front wheels are spinning or beginning to lose traction.
The traction control system automatically comes on whenever you start your vehicle. To limit wheel spin, especially in slippery road conditions, you should always leave the system on. But you can turn the traction control system need to. (You should turn the system off if your vehicle ever gets stL~ck in sand, mud, ice or snow, See “Rocking Your Vehicle”...
Steering Power Steering If you lose power steering assist because the engine stops or the system is not functioning, you can steer but it will take much more effort. Steering Tips Driving on Curves It’s important to take curves at a reasonable speed. A lot of the “driver lost control”...
Your Pontiac can perform very well in emergencies like these. First apply your brakes. (See “Braking in Emergencies” earlier in this section.) It is better to remove as much speed as you can from a possible collision.
Page 204
Passing The driver a vehicle about to pass another on a two-lane highway waits for just the right moment, accelerates, moves around the vehicle ahead, then goes back into the right lane again. A simple maneuver? Not necessarily! Passing another vehicle on a two-lane highway is a potentially dangerous move, since the passing vehicle occupies the same lane traffic for several seconds.
“overdriving” those conditions. But skids are always possible. time on The three types of skids correspond to your Pontiac’s three control systems. In aren’t rolling. In the steering or cornering skid, too much speed or steering in a curve causes tires to slip and force.
your vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the vehicle to go. If you start steering quickly enough, your vehicle may straighten out. Always be ready for a second skid if it occurs. Of course, traction is reduced when water, snow, ice, gravel, or other material is on the road.
Here are some tips on night driving. Drive defensively. Don’t drink and drive. Adjust your inside rearview mirror to reduce the glare from headlamps behind you. Since you can’t see as well, you may need to slow down and keep more space between you and other vehicles.
Keep your windshield and all the glass on your vehicle clean inside and out. Glare at night is made much worse by dirt the glass. Even the inside of the glass can build up a film caused by dust. Dirty glass makes lights dazzle and flash more than clean glass would, making the pupils of your eyes contract repeatedly.
Page 209
The heavier the rain, the harder it windshield wiper blades are in good shape, a heavy rain can make it harder see road signs and traffic signals, pavement markings, the edge of the road, and even people walking. It’s wise to keep your wiping equipment in good shape and keep your windshield washer tank filled.
Hydroplaning doesn’t happen often. But it can if your tires haven’t much tread or if the pressure in one or more is low. It can happen if a lot of water is standing on the road. If you can see reflections from trees, telephone poles, or other vehicles, and raindrops “dimple”...
Here are ways to increase your safety in city driving: Treat a green light as a warning signal. is there because the corner is busy enough to need it. When a turns green, and just before you light move, check both ways for vehicles that have not cleared the intersection or may be running the red light.
Is your vehicle ready for a long trip? If you keep serviced and maintained, it’s ready to go. If it needs service, have it done before starting out. Of course, you’ll find experienced and able service experts in Pontiac dealerships all across North America. They’ll be ready willing help if you need it.
Here are some things you can check before a trip: Windshield Washer Fluid: the reservoir full? Are all windows clean inside and outside? Wiper Blades: Are they in good shape? Fuel, Engine Oil, Other Fluids: Have you checked all levels? Lamps: Are they all working? Are the lenses clean? Tires: They are vitally important to a safe, trouble-free trip.
Hill and Mountain Roads Driving on steep hills or mountains is different from driving in flat or rolling terrain. you drive regularly in steep country, planning to visit there, here are some tips that can make if you’re 4-23...
There could be alert. Here are some an accident. Have your Pontiac in good shape for winter. Be sure your engine coolant a You your v'ehicle. tips for winter driving: is correct. may want to put winter emergency supplies in...
Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth, and a couple of reflective warning triangles. And, if you will be driving under severe conditions, include a small bag of sand, a piece of old carpet or a couple of burlap bags to help provide traction.
Page 217
Whatever the condition smooth ice, packed, blowing or loose snow drive with caution. If you have the traction control system, keep the system on. It will improve your ability to accelerate when Even driving on a slippery road. though your vehicle has a traction control system, you’ll want to slow down and adjust your driving to the road conditions.
If You’re Caught in a Blizzard If you are stopped by heavy snow, you could be in serious situation. You should probably stay with your vehicle unless you know for sure that you are near help and you hike through snow.
Loading Your Vehicle MFD BY GENERAL MOTORS CORP GVWR GAWR FRT GAWR RR THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S. FEDERAL MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE DATE OF MANUFACTURE SHOWN ABOVE. SERIAL NUMBER M.P.V. MODEL: SPEED MPBY TIRE SIZE SEE OWNERS MANUAL FOR ADDITIONAL INFORMATION The CertificatiodTire label is found on the rear edge of...
Page 221
Electronic Level Control (Option) On vehicles equipped with the opti’onal electronic level control, the rear the vehicle is automatically kept level as you load or unload your vehicle. For more about this option, see “Electronic Level Control” in the Index. Using heavier suspension components durability might not change your weight ratings.
If You Do Decide To Pull A Trailer If you do, here are some important points. There are many different laws, including speed limit restrictions, having to do with trailering. Make sure your will be legal, not only where you live but also where you’ll be driving.
You can ask your dealer for our trailering information or advice, or you can write us at: Customer Assistance Center Pontiac Division One Pontiac Plaza Pontiac, MI 48340-2952 In Canada, write to: General Motors of Canada Limited Customer Assistance Center...
you’re using a “dead-weight” hitch, the trailer tongue (A) should weigh 10% of the total loaded trailer weight (B). If you have a “weight-distributing” hitch, the trailer tongue (A) should weigh 12% of the total loaded trailer weight (B). After you’ve loaded your trailer, weigh the trailer and then the tongue, separately, to see if the weights are proper.
Safety Chains You should always attach chains between your vehicle and your trailer. Cross the safety chains under the tongue of the trailer so that the tongue will not drop to the road if it becomes separated from the hitch. Instructions about safety chains may be provided by the hitch manufacturer or by the trailer manufacturer.
Towing a trailer requires a certain amount of experience. Before setting out for the open road, you’ll want to get to know your Acquaint yourself with the feel of rig. handling and braking with the added weight of the trailer. And always keep in mind that the vehicle you are driving is now a good deal longer and not nearly as responsive as your vehicle is by itself.
Making Turns NOTICE: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. Your vehicle could be damaged. Avoid making very sharp turns while trailering. When you’re turning with a trailer, make wider turns than normal.
Parking on Hills really should not park your vehicle, with attached, on a hill. something goes wrong, your rig could start to move. People can be injured, and both your vehicle and the trailer can be damaged. But if you ever have to park your rig on a hill, here’s how to do it: Apply your regular brakes, but don’t shift into PARK (P)
Section 5 Problems on the Road Here you’ll find what to do about some problems that can occur on the road. Hazard Warning Flashers Your hazard warning flashers let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will flash on and off.
Jump Starting If your battery has run down, you may want to use another vehicle and some jumper cables to start your Pontiac. But please follow the steps below to do it safely. On vehicles equipped door, a low voltage battery or replacing a battery may cause the system to become inoperative.
Page 234
NOTICE: Ignoring these steps could result in costly to your vehicle that wouldn’t be covered by your warranty. Trying to start your Pontiac by pushing or it won’t work, and it could damage your pulling vehicle. To Jump Start Your Pontiac 1.
Page 235
4. Open the hoods and locate the batteries. 5. Find the positive and negative each battery. Your Pontiac has a remote positive terminal. The side of the engine compartment as your battery. You should always use the remote positive terminal instead of the positive battery.
Page 236
Check that the jumper cables don’t have loose missing insulation. they do, you could get shock. The vehicles could be damaged, too. Before you connect the cables, here are some basic things you should know. Positive will go to positive and negative will go to negative metal engine part.
Page 237
7. Connect the red positive cable to the positive terminal of the vehicle with the dead battery. Use a remote positive terminal if the vehicle has one. 8. Don’t let the other end touch metal. Connect it to the positive terminal of the good battery.
Page 238
3.1L V6 Engine 3800 V6 Engine 10. Attach the cable at least 18 inches (45 cm) away from the dead battery, but not near engine parts that move. The electrical connection is but the chance of sparks getting back to the battery is much less.
- F 7 GOOD BATTERY DEAR BATTERY 13. Remove the cables in reverse order to prevent electrical shorting. Take care that they don’t touch each other or any other metal. Towing Your Vehicle Try to have a GM dealer or a professional towing service tow your vehicle.
Page 240
your vehicle has been changed or modified since it was factory-new adding aftermarket items like fog lamps, aero skirting, or special tires and wheels, these instructions and illustrations may not be correct. Before you do anything, turn on the hazard warning flashers.
Page 241
When your vehicle is being towed, have the ignition key turned to the OFF position. The steering wheel should be clamped in a straight-ahead position, with a clamping device designed for towing service. Do not use the vehicle’s steering column lock for t h s The transaxle should be in NEUTRAL (N) and the parking brake released.
Page 242
Towing from the Front Vehicle Hookup Before hooking up to a tow truck, be sure to read all the information on “Towing Your Vehicle’’ earlier in this section. NOTICE: Do not tow with sling-type equipment or fascia damage will occur. Use wheel-lift or car carrier equipment.
Page 243
Attach chain around the outboard a separate safety Attach T-hook chains on both sides, in the slotted end of each lower control arm. holes in the bottom of the frame rails, about two feet behind the front wheels. 5-12...
Page 244
Towing from the Rear Vehicle Hookup Before hooking to a tow truck, be sure to read all the information on “Towing Your Vehicle’’ earlier in this section. 1. Attach T-hook chains on both sides, in the slotted holes in the frame rails, just ahead of the rear wheels. 2.
Page 245
3. Attach a separate safety chain around the end of each axle inboard of the spring. Be certain your vehicle is towed no faster and no farther 50 miles (80 (56 km/h) than avoid damage to your transaxle. 5-14 NOTICE: Towing vehicle over rough surfaces could damage a vehicle.
Engine Overheating You will find a coolant temperature gage on your Pontiac’s instrument panel. See “Coolant Temperature Gage” in the Index. If Steam Is Coming From Your Engine 5-15...
NOTICE: your engine catches fire because you keep driving with no coolant, your vehicle can be badly damaged. The costly repairs would not be covered by your warranty. If No Steam Is Coming From Your Engine you get the overheat warning but see or hear steam, the problem may not be too serious.
Cooling System 3.1L V6: Cooling System When you decide it’s safe to lift the hood, here’s what you’ll see: (A) Coolant recovery tank Radiator pressure cap (C) Electric engine fan, or fans if you have the 3800 V6 engine. 5-17...
Page 249
3800 V6: Cooling System If the coolant inside the coolant recovery tank don’t do anything else until it cools down. 5-18 3.1L V6: Recovery Tank Level The coolant level should be at or above the FULL HOT mark. If it isn’t, you may have a leak in the radiator hoses, heater hoses, radiator, water pump or somewhere is boiling, else in the cooling system.
Page 250
3800 V6: Recovery Tank Level NOTICE: Engine damage from running your engine without coolant isn’t covered by your warranty. If there seems to be no leak, with the engine on, check to see if the electric engine fan is running. If the engine is overheating, the fan should be running.
Page 251
Add Coolant to the Coolant Recovery Tank If you haven’t found a problem yet, but the coolant level isn’t at or above the FULL HOT mark, add mixture of clean. water (preferably distilled) and a proper antifreeze at the coolant recovery tank. (See “Engine Coolant”...
How to Add Coolant to the Radiator 1. You can remove the radiator pressure cap when the cooling system, including the radiator pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly to the left until it first stops. (Don’t press down while turning the pressure cap.) If you hear a hiss, wait for that to stop.
Page 254
3800 V6: Removing the Pressure Cap Fill the radiator with the proper mix, up to the base of the filler neck. 4. Then fill the coolant recovery tank to the FULL HOT mark. 5. Put the cap back on the coolant recovery tank, but leave the radiator pressure cap off.
Page 255
3800 V6: Upper Radiator Hose 6. Start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine fan( 7. By this time the coolant level inside the radiator filler neck may be lower. If the level is lower, add more of the proper mix through the filler the level reaches the base of the filler neck.
3800 V6: Replacing the Pressure Cap 8. Then replace the pressure cap. At any time during this procedure coolant begins filler neck, reinstall the pressure cap. Be sure the arrows on the pressure cap line up as shown. If a Tire Goes Flat It’s unusual for a tire to “blow out”...
Changing Flat Tire If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your hazard warning flashers. 5-26 The following steps will tell you how to use the jack and change a tire.
Page 258
1. Open the jack storage compartment latch down and removing the compartment cover. sliding the Remove the jack and jacking tools wing nut and retainer bar. 3. Separate the plastic pouch from the jack and remove the jacking tools (folding wrench and shaft) from the pouch.
Page 259
The compact spare tire is located under the vehicle, behind the rear bumper. Insert the narrow end of the shaft into the hole above the rear bumper. Then attach the folding wrench to the shaft. Rotate the folding wrench counterclockwise to lower the compact spare tire until it can be pulled from under the vehicle.
Page 260
7. If your vehicle has aluminum wheels, each wheel nut is covered with a nylon cap. Use the folding wrench to remove the nylon caps from the wheel nuts before you loosen the nuts. If your vehicle has the plastic “bolt-on” wheel covers, you cannot separate the nylon wheel nut caps from the cover.
Page 261
11. Near each wheel, there is a notch in the vehicle’s frame. Position jack and raise the jack head until it fits finnly into the notch in the vehicle’s frame nearest the flat tire. Do not yet. Put the compact spare tire mar you. 5-30 NOTICE: R a i s i n g...
Page 262
12. Raise the vehicle by rotating the folding wrench clockwise in the jack. Raise the vehicle far enough off the ground so there is enough room for the spare tire to fit. 13. Remove all the wheel nuts and 14. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel.
Page 263
15. Replace the wheel nuts with the rounded end of the nuts toward the wheel. Tighten each nut by hand until the wheel is held against the hub. 16. Lower vehicle attaching the folding wheel wrench to and rotating the wrench the jack counterclockwise.
Page 264
Don’t try to put a wheel cover on the compact spare tire. It won’t fit. Store the wheel cover securely in the rear the vehicle until you have the flat tire repaired or replaced. NOTICE: Wheel covers won’t fit on your compact spare. If you try to put a wheel cover on your compact spare, you could damage the cover or the spare.
Unless you have the plastic “bolt-on” wheel covers, be sure to also store the nylon nut caps. When you replace the compact spare with a full-size tire, replace the bolt-on wheel covers or the nylon nut caps. Tighten them “hand tight” Over the wheel nuts, using the folding wrench (see step 7 ) .
Don’t use your compact spare on some other vehicle. don’t your compact spare or wheel with other wheels or tires. They won’t fit. Keep your spare and its wheel together. NOTICE: Tire chains won’t fit your compact spare. Using them will damage your vehicle and destroy the chains too.
Page 267
NOTICE: Spinning your wheels can destroy parts of your vehicle as well as the tires. If you spin the wheels too fast while shifting your transaxle back and forth, you can destroy your transaxle. For information about using tire chains on your vehicle, see “Tire Chains”...
If you want to do some of your own service work, you’ll want to get the proper Pontiac Service Manual. It tells you much more about how to service your Pontiac than this manual can. To order the proper service manual, see...
Page 271
Your vehicle has an air bag system. Before attempting to do your own service work, see “Servicing Your Air Bag-Equipped Pontiac” in the Index. You s h d d keep a record with all parts receipts and list the mileage and the date of any service work you perform.
Page 272
Be sure the posted octane is at least 87. less than 87, you may get heavy knocking noise when you drive. If it’s bad enough, it can damage your engine. If you’re using fuel rated 87 octane or higher and you still hear heavy knocking, your engine needs service.
Gasolines for Cleaner Air Your use of gasoline with deposit control additives will help prevent deposits from forming in your engine and fuel system. That helps keep your engine in tune and your emission control system working properly. It’s good for your vehicle, and you’ll be doing your part for cleaner air.
Filling Your Tank The cap is behind a hinged door on the driver’s side of your vehicle. You will notice that on the inside of the hinged door there is a place to hold the gas cap while you are adding fuel. To take off the cap, turn it slowly counterclockwise.
Be careful not to spill gasoline. Clean gasoline painted surfaces as soon as possible. See “Cleaning the Index. Outside of Your Pontiac” in the When you put the cap back on, turn it to the right until clicking noise. you hear...
Page 276
The hood prop may be hot due to increased engine Next, go to the front of the vehicle and pull up on the temperatures under the hood, so be careful when underhood release. Lift the hood. handling it. Use your hood prop sleeve when handling the hood prop.
Page 277
Before closing the hood, be all the fil€er caps sure Then the hood to properly. lift relieve pressure hood prop. Remove the hood prop from the slot in the retainer. hood and r e m the Drcm on the Let the hood...
Underhood Lamp Your underhood lamp will go when you open the hood. Engine Oil It’s a good idea to check your engine oil every time you get fuel. In order to get an accurate reading, the oil must warm and the vehicle must be on level ground. The engine oil dipstick is located at the front of the near engine compartment,...
Page 281
3800 V6: Checking Engine Oil When to Add Oil If the oil is at or below the ADD mark, then you’ll need to add some oil. But you must use the right kind. This part explains what kind of oil to use. For crankcase capacity, see “Capacities Specifications”...
I \ \ \ - I \ k 3800 V6: Adding Engine Oil The engine oil fill cap is located just behind the engine oil dipstick. Just fill it enough to put the level somewhere in the proper operating range. Push the dipstick all the way back in when you’re through.
Page 283
3.1L V6 Engine As shown in the chart, SAE 5W-30 is best for your vehiclel However, you can use SAE 1OW-30 to be 0°F C) or above. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils, such as SAE 20W-50.
Page 284
RECOMMENDED SAE VISCOSITY GRADE FOR REST FUEL ECONOMY AND COLD STARTING, SELECT THE LOWEST SAE VISCOSITY GRADE OIL FOR THE EXPECTED TEMPERATURE RANGE. WEATHER “F “C 100- +EO- + 6 0 - + 1 6 + 4 0 - - + 4 + 2 0 - - - 7 0 - - - l e SAE 1OW-30...
Engine Oil Additives Don’t add anything to your oil. Your Pontiac dealer is ready to advise if you think something should be added. When to Change Engine Oil See if any one of these is true for you: Most trips are less than...
Air Cleaner 3.1L V6 cleaner engine is circular in shape and is located toward the back of the engine compartment, near the center. cleaner for the 3800 engine is located at the front of the engine compartment (on the driver’s side of the vehicle), to the left of the windshield washer fluid reservoir.
Page 287
3.1L V6: Checking the Air Cleaner Filter Check or Replace (3.1L V6) 1. Remove the large wing nut and lift the cover. 2. Remove the air cleaner filter. Be sure to install the ail- cleaner filter, replace the cover and tighten the wing nut securely. 6-18 3800 V6: Replacing the Air Cleaner Filter To Check or Replace (3800 V6)
How to Check Because this operation can be a little difficult, you may choose to have done your Pontiac dealer Service this Department. If you do it yourself, be sure to follow here, or you could get a false reading on the dipstick.
Page 289
Get the vehicle warmed up by driving about k m ) when outside temperatures are above 50°F 50°F 10°C), you may have (10°C). If it’s colder than to dnve longer. To Check the Fluid Level 1. Park your vehicle on a level place. Keep the engine running.
2. Push it back in all the way, wait three seconds and then pull it back out again. Check both sides of the dipstick, and read the lower level. The fluid level must be in the cross-hatched area. 4. If the fluid level is in the acceptable range, push the dipstick back in all the way.
If you have a problem with engine overheating, see “Engine Overheating” in the Index. The proper coolant for your Pontiac will: Give freezing protection down to -34°F (-37°C). Give boiling protection up to 262°F (128 “C).
Adding Coolant The engine coolant reservoir is located towards the middle of the engine compartment, on the passenger’s side the vehicle. To Check Coolant When your engine is cold, the coolant level should be at COLD or a little higher. When your engine is warm, the level should be up to FULL HOT, or a little higher.
Add coolant recovery tank, but be careful not to spill it. 6-24 Radiator Pressure Cap NOTICE: Your radiator cap is a 15 psi (105 kPa) prem-e-type cap and must be tightly instaned prevent coolant loss and possible engine damage from overheating. Be sure the arrows on the cap line up with the overflow tube on the radiator filler neck.
Power Steering Fluid 3.1L V6: Checking Power Steering Fluid The power steering fluid reservoir for the 3.1L V6 engine is located towards the back of the engine compartment, to the left of the circular air cleaner. 3800 V6: Checking Power Steering Fluid The power steering fluid reservoir for the 3800 V6 engine is located to the right of the engine coolant reservoir, at the very back of the engine compartment.
How To Check Power Steering Fluid When the engine compartment is cool, unscrew the cap and wipe the dipstick with a clean rag. Replace the cap and completely tighten it. Then remove the cap again and look at the fluid level on the dipstick. The level should be at the FULL COLD mark.
The windshield washer fluid reservoir is located on the driver’s side of the vehicle, toward the front of the engine compartment. Open the cap labeled WASHER FLUID ONLY. Add washer fluid until the tank is full. NOTICE: When using concentrated washer fluid, follow the manufacturer’s instructions for adding water.
Page 297
should have your brake syste-m fixed, since a leak means that sooner or later your brakes won’t work well, or won’t wurk at all. So, it isn’t good idea to “top your brake fluid. Adding brake flui’d won’t correct a leak.
Brake Wear Your Pontiac has front disc brakes and rear drum brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound may come...
Vehicles we design and test have top-quality parts them, as your Pontiac does when it is new. When you replace parts of your braking system example, when your brake linings wear down and you...
Jump Starting jump starting instructions, see “Jump Starting” in the Index. Halogen Bulbs Headlamp Bulb Replacement For the type of bulb, see “Replacement Bulbs” in the Index. 1. Remove the two black knobs. 2. Tilt the bulb housing forward. 6-31...
3. Twist the L-shaped bulb assembly counterclockwise 1/6 turn until the flanges align with the slots in the retainer ring. 4. Pull out the bulb assembly. Disconnect the bulb wiring harness assembly by lifting the plastic locking tab. 6. Snap a new bulb assembly onto the wiring harness. 7.
Page 302
Pull off the entire taillamp housing. Pinch the lever and twist the bulb assembly counterclockwise to remove. Remove the bulb by pressing in and turning 1/8 turn counterclockwise. Line up the small retainer bumps bulb so that the lower bump slides into the deepest slot in the housing.
These tires are warranted by the tire manufacturers and their warranties are delivered with every new Pontiac. If your spare tire is a different brand than your road tires, you will have a tire warranty folder from each of these manufacturers.
Inflation Tire Pressure The Certificatiodl‘ire label which is on the rear edge of the driver’s door shows the correct inflation pressures for your tires, when they’re cold. “Cold” means your vehicle has been sitting for at least three hours or driven no more than a mile.
When to Check Check your tires once a month or more. Don’t forget your compact spare tire. It should be at 60 psi (420 P a ) . How to Check Use a good quality pocket-type gage to check tire pressure.
Page 306
When rotating your tires, always use the correct rotation pattern shown here. Don’t include the compact spare tire in your tire rotation. After the tires have been rotated, adjust the Eront and rear inflation pressures as shown on the CertificatiodT‘ire label. Make certain that a l l wheel nuts are properly tightened.
When it’s Time for New Tires way to time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 less of tread remaining. You need a new tire if: You can see the indicators at three or more places around the tire.
Uniform Tire Quality Grading The following information relates to the system -developed by the United States National Highway TrdEic Safetv Administration which grades tires b y treadwear, traction and temperature performance. (This applies only vehicles sold in the United States.) Treadwear The treadwear grade a comparative rating based on...
A, B, C Temperature The temperature grades are (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheeI. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
If the wheel leaks air, replace it (except some aluminum wheels, which can sometimes be repaired). See your Pontiac dealer any of these conditions exist. Your dealer will know the kind of wheel you need.
NOTICE: The wrong wheel can also cause problems with bearing life, brake cooling, speedometer/odometer calibration, headlamp aim, bumper height, vehicle ground clearance, and tire or tire chain clearance to the body and chassis. Used Replacement Wheels 6-42 Tire Chains NOTICE: Use tire chains only where legal and only when you must.
When you use anything from a container to clean your Pontiac, be sure to follow the manufacturer’s warnings and instructions. And always open your doors or windows when you’re cleaning the inside.
Page 313
Using Foam-Type Cleaner on Fabric Vacuum and brush the area to remove any loose dirt. Always clean a whole trim panel or section. Mask surrounding trim along stitch or welt lines. Mix Multi-Purpose Powdered Cleaner following the directions on the container label. Use suds only and apply with a clean sponge.
Special Cleaning Problems Greasy or Oily Stains Stains caused by grease, oil, butter, margarine, shoe polish, coffee with cream, chewing gum, cosmetic creams, vegetable oils, wax crayon, tar and asphalt can be removed as follows: Carefully scrape off excess stain. Follow the solvent-type instructions described earlier.
Cleaning Leather Use a soft cloth with lukewarm water and a mild soap or saddle soap. For stubborn stains, use a mild solution of 10% isopropyl alcohol (rubbing alcohol) and 90% water. Never use oils, varnishes, solvent-b.ased or abrasive cleaners, furniture polish or shoe polish on leather. Soiled leather should be cleaned immediately.
OFF position. High pressure car washes may cause water to enter your vehicle. Finish Care Occasional waxing or mild polishing of your Pontiac by hand may be necessary remove residue from the paint 6-47...
Exterior painted surfaces are subject to aging, weather and chemical fallout, that can take their toll over a 6-48 period of years. You can help to keep the paint finish looking new by keeping your Pontiac garaged or covered whenever possible. Aluminum Wheels (If So Equipped) Your aluminum wheels have a protective coating similar to the painted surface of your vehicle.
Although no defect in the paint job causes this, Pontiac will repair, at no charge to the owner, new vehicles damaged by this fallout condition within...
Appearance Care and Maintenance Materials You can PART NUMBER SIZE 12345343 16 oz. (0.473L) 1052277 (0.354L) 1052863 (0.028kg) 1050172 16 oz. (0.473L) 1051515 (0.946L) 1052870 16 oz. (0.473L) Not recommended for pigskin suede leather. General Motors Parts Departments for these your See your Maintenance Schedule for other products.
Engine Identification The eighth character in your VIN is the engine code. This code will help you identify your engine, , , A specifications, and replacement parts. legal identifier your Pontiac. It appears on 6-51...
Some add-on electrical equipment can keep other components from working as they should. Your vehicle has an air bag system. Before attempting to add anything electrical to your Pontiac, see “Servicing Bag-Equipped Your Air Index. Pontiac” in the...
Fuses and Circuit Breakers The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers, and fusible thermal links in the wiring itself. This greatly reduces the chance of fires caused by electrical problems.
Page 323
Fuse Panel (3.1L V6) r a n TA1 L HORN TURN B/U r"-4 GAUGES RDOl/AUX Position Circuitry Dome Lamps, Courtesy Lamps, Power Door Lock Switches, Glove Lamp, Power Mirrors, Power Sliding Delay Lock Module Auto Level Control, Underhood Lamp HORN Horns, Horn Relay, Safety Belt Buzzer STOP HAZ FrontRear Turn Lamps, Front Sidemarker Lamps,...
Page 324
Fuse Panel (3800 V6) €5 p " 1 HORN TURN B/U €3 p-"l STOP HAZ GAUGES RDOVAUX INJ 3365D €3 TAIL Position Circuitry CTSY Dome Lamps, Courtesy Lamps, Power Door Lock Switches, Glove Box Lamp, Power Mirrors, Power Sliding Delay Lock Module Auto Level Control, Underhood Lamp HORN...
Page 325
Circuit Breaker/Relay Panel Circuit breakers and relays located in the circuit breakerhelay panel. This is located behind under the glove box, near the passenger's door. 6-56 Position panel Circuitry Hazard Flasher With 3800 V6 engine only: Canister Purge Solenoid, A/C Clutch Control Relay, Cruise Control Not Used Power Windows Circuit Breaker...
Page 326
Anti-Lock Brake System (ABS) Junction Block Fuse You’ll find this fuse under the hood in the ABS junction block, located next remote positive jump starting to the terminal. To open the junction block, press in on both sides of the cover.
To access the fuse, pry back the latch with a screwdriver, then pull down on the base of the unit. If you need to replace the fuse, be sure to use one with the same amperage. Push the base of the unit firmly up into the cover until the latch snaps into the locked position.
With Rear Heater (Canada Only) Refkiigerant, Air Conditioning Not all air conditioning refrigerants are the same. the proper refrigerant is used. If you 're not sure, ask your Pontiac dealel: 6-60 ..measure.
AT THE PROPER LEVEL AND CHANGE AS RECOMMENDED This section covers the maintenance required for your Pontiac. Your vehicle needs these services to retain its safety, dependability and emission control performance. ‘I Have you purchased the GM Protection Plan? The Plan supplements your new vehicle warranties.
6‘Part C: Periodic Maintenance Inspections” explains important inspections that your Pontiac dealer’s service department or another qualified service center should perform. “Part D: Recommended Fluids and Lubricants” lists some products GM recommends to help keep your vehicle properly maintained.
I f you have any questions on how to keep your vehicle in good condition, see your Pontiac dealer. This part tells you the maintenance services you should have done and when you should schedule them. If you go to your dealer for your service needs, you’ll know...
Maintenance Schedule Schedule I Definition Follow Maintenance Schedule I if any one of these is true for your vehicle: Most trips are less than 5 to I O miles (8 to 16 km). This is particularly important when outside are below freezing. temperatures Most trips include extensive idling (such as frequent driving in stop-and-go traffic).
Page 338
Maintenance Schedule Schedule I1 Definition Follow Schedule I1 only if none of the conditions from Schedule I are true. Schedule I1 Intervals Every 7,500 Miles (12 Engine Oil and Filter Change (or every 12 months, whichever occurs first) Chassis Lubrication (or every 12 months, whichever occurs first) At 7,500 Miles (12 500 km) Then Every...
in this schedule up to 100,000 mues The services shown k m ) 166 000 should be performed after 100,000 miles 000 km) at the same intervals. Footnotes The U.S. Environmental Protection Agency or the California Air Resources Board has determined that the failure to perform this maintenance item will not nullify the emission warranty or limit recall liability prior to the completion of the vehicle’s useful life.
Maintenance Schedule I 6,000 Miles (10 000 km) I 3 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 6 months, whichever occurs first).
Page 341
Maintenance Schedule I 12,000 Miles (20 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 6 months, whichever occurs first).
Page 342
Maintenance Schedule I 18,000 Miles (30 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every whichever occurs first).
Page 343
Maintenance Schedule I 24,000 Miles (40 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 6 months, whichever occurs first).
Page 344
Maintenance Schedule I 30,000 Miles (50 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every whichever occurs first).
Page 345
Maintenance Schedule I 33,000 Miles (55 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. ACTUAL MILEAGE 7-12 36,000 Miles Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service.
Page 346
Maintenance Schedule I 39,000 Miles (65 000 km) Change engine oil and filter (or every months, whichever occurs first). An Emission Control Service. 42,000 Miles (70 000 km) Change engine oil and filter (or every months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact...
Page 347
Maintenance Schedule I 45,000 Miles (75 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Inspect air cleaner filter if you are driving in dusty conditions. Replace filter if necessary. An Emission Control Service. 7-14 48,000 Miles (80 000 km) Change engine oil and filter (or every...
Page 348
Maintenance Schedule I 50,000 Miles (83 000 km) Change automatic transaxle fluid and filter if the vehicle is mainly driven under one or more of these conditions: heavy city traffic where the outside temperature regularly reaches C) or higher. In hilly or mountainous terrain. When doing frequent trailer towing.
Page 349
Maintenance Schedule I 54,000 Miles (90 000 km) Change engine oil and filter (or every 3 months, whchever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody points and linkage (or every whichever occurs first).
Page 350
Maintenance Schedule I 60,000 Miles (100 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 6 months, whichever occurs first).
Page 351
Maintenance Schedule I 60,000 Miles (100 000 km) (Continued) Inspect Exhaust Gas Recirculation (EGR) system (or every 60 months, whichever occurs first) (3.1 L Code D engine only). An Emission Control Service. Adjust engine timing to the underhood label specifications (or every 60 months, whichever occurs first) (3.1L Code D engine only).
Page 352
Maintenance Schedule I 66,000 Miles (110 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage every whichever occurs first).
Page 353
Maintenance Schedule I 72,000 Miles (120 000 km) Change engine oil and filter (or every months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 6 months, whichever occurs first).
Page 354
Maintenance Schedule I 78,000 Miles (130 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every whichever occurs first).
Page 355
Maintenance Schedule I 84,1000 Miles (140 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 6 months, whichever occurs first).
Page 356
Maintenance Schedule I 90,000 Miles (150 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 6 months, whichever occurs first).
Page 357
Maintenance Schedule I 93,000 Miles (155 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. DATE ACTUAL MILEAGE 7-24 96,000 Miles (160 000 km) Change engine oil and filter (or every 3 months, whichever occurs first).
Page 358
Maintenance Schedule I 99,000 Miles (165 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. DATE ACTUAL MILEAGE 100,000 Miles (1 44 000 km) Change automatic transaxle fluid and filter if the vehicle is mainly driven under one or more of these conditions: heavy city traffic where the outside temperature regularly reaches 90...
Page 359
The services shown in this schedule up to 100,000 miles (1 66 should be performed after 100,000 miles (1 66 000 at the same intervals. krn) Footnotes The U.S. Environmental Protection Agency or the California Air Resources Board has determined that the failure to perform this maintenance item will not nullify the emission warranty or limit recall liability prior to the completion of the vehicle’s useful life.
Maintenance Schedule I1 15,000 Miles (25 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 12 months, whichever occurs first).
Page 361
Maintenance Schedule I1 30,000 (50 000 km) Miles Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 12 months, whichever occurs first).
Page 362
37,500 Miles (62 500 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 12 months, whichever occurs first).
Page 363
50,000 Miles (83 000 km) Change automatic transaxle fluid and filter if the vehicle is mainly driven under one or more of these conditions: In heavy city traffic where the outside temperature regularly reaches (32°C) or higher. In hilly or mountainous terrain. When doing frequent trailer towing.
Page 364
Maintenance Schedule I1 60,000 Miles (100 000 km) engine oil and filter (or every Change months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 12 months, whichever occurs first).
Page 365
Maintenance Schedule I1 60,000 Miles (100 000 km) (Continued) Inspect Exhaust Gas Recirculation (EGR) system (or every months, whichever occurs first) (3.1L Code D engine only). An Emission Control Service. Adjust engine timing to the underhood label specifications every 60 months, whichever occurs first) (3.1L Code D engine only).
Page 366
Maintenance Schedule I1 75,000 Miles (125 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parkmg brake cable guides and underbody contact points and linkage (or every 12 months, whichever occurs first).
Page 367
Maintenance Schedule I1 90,000 Miles (150 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking and underbody contact brake cable guides points and linkage (or every 12 months, whichever occurs first).
Page 368
97,500 Miles (1 62 500 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Lubricate the suspension and steering linkage, transaxle shift linkage, parking brake cable guides and underbody contact points and linkage (or every 12 months, whichever occurs first).
Part B: Owner Checks and Services Listed below are owner checks and services which should be performed at the intervals specified to help ensure the safety, dependability and emission control performance of your vehicle. Be sure any necessary repairs are completed at once. Whenever any fluids or lubricants are added to your vehicle, make sure they are the proper ones, as shown in Part D.
At Least Once a Year Key Lock Cylinders Lubricate the key lock cylinders with the lubricant specified in Part D. Body Lubrication Lubricate all body door hinges, including the liftgate. Also lubricate all hinges and latches, including those for the hood, sliding door track, rear compartment, glove box door, console door, and any folding seat hardware.
Page 371
3. With the engine off, turn the key to the RUN position, but don’t start the engine. Without applying the regular brake, try to move the shift lever out of PARK (P) with normal effort. the shift lever moves out of PARK BTSI your vehicle’s needs service.
Page 372
Part C: Periodic Maintenance Inspections Listed below are inspections and services which should be performed at least twice a year (for instance, each spring and fall). You should let your GM dealer’s service department or other qualified service center do these jobs.
Page 373
Part I ) : Recommended Fluids and Lubricants NOTE: Fluids and lubricants identified below by name, part number or specification may be obtained GM dealer. FLUIDLUBRICANT USAGE Engine Oil Engine oil with the American Petroleum Institute Certified For Gasoline Engines “Starburst” symbol of the proper viscosity.
Page 374
USAGE FLUIDLUBRICANT Chassis Chassis lubricant (GM Part Lubrication No. 1052497 or equivalent) or lubricant meeting requirements of NLGI Grade 2, Category LB or GC-LB. Windshield GM Optikleen@ Washer Solvent Washer Solvent (GM Part No. 1051515 or equivalent). Hood Latch Assembly a.
Part E: Maintenance Record After the scheduled services are performed, record the date, odometer reading and who performed the service in the boxes provided after the maintenance interval. ODOMETER DATE READING 7-42 additional information Services” or “Periodic Maintenance” can be added on the following record pages.
Page 376
Maintenance Record ODOMETER DATE MAINTENANCE PERFORMED SERVICED BY READING _ ~ _ " ~~~~ ~~~~ 7-43...
Page 377
Maintenance Record ODOMETER SERVICED READING MAINTENANCE PEFWORMED 7-44...
Page 378
Maintenance Record ODOMETER DATE SERVICED BY READING MAINTENANCE PERFORMED 7-45...
Section 8 Customer Assistance Information Here you will find out how to contact Pontiac if you need assistance. This section also tells you how to obtain service publications and how to report any safety defects. This section includes information on: The Customer...
Vehicle delivery date and present mileage Nature of concern We encourage you to call the toll-free number listed previously in order to give your inquiry prompt attention. However, if you wish to write Pontiac, write United States Pontiac Division Customer Assistance Center...
Page 382
Both Pontiac and your Pontiac dealer are committed to making sure you are completely satisfied with your new vehicle. Our experience has shown that, if a situation...
BBB at any time. The BBB will attempt to resolve the complaint serving as an intermediary between you and Pontiac. If this mediation is unsuccessful, an informal hearing will be scheduled where eligible customers may present their case to impartial third-party arbitrator.
Pontiac Roadside Assistance Program Security While You Travel 1-800-ROADSIDE 1-800-762-3743 As the proud owner of a new Pontiac vehicle, you are automatically enrolled in the Pontiac Roadside Assistance Program. This value-added service is intended to provide you with peace of mind as you drive in the city or travel the open road.
Page 385
Vehicle identification number Vehicle license plate number Pontiac reserves the right to limit services or reimbursement to an owner or driver when in Pontiac’s judgement the claims become obsessive in frequency or type of occurrence. While we hope that you never have the occasion to use...
Canadian Roadside Assistance Vehicles purchased in Canada have an extensive Roadside Assistance program accessible from anywhere in Canada or the United States. Please refer to the separate brochure provided by the dealer or call 1-800-268-6800 for emergency services. Service and Owner Publications Service manuals, service bulletins, owner’s manuals and other service literature are available for purchase for all current and many past model General Motors vehicles.
Page 392
Outside of the Windshield. Backglass and 1-39 ..Wiper 4-29 Special Problems 4-35 Stains 6-42 5-26 The Inside of Your Pontiac The Outside of Your Pontiac 1-62 Tires Top of the Instrument Panel 6- 19 Vinyl 6-27 6-23 Climate Control System...
Page 396
... Lighter Loading Your Velvcle Locks ......Automatic Door .
Page 397
Overhead Console Garage Door Opener Compartment Reading Lamps Storage Compartment Sunglasses Storage Compartment Temperature and Compass Display Overheated Engine ....Override Switch. Interior Lights .
Page 398
..Rear Window Wiper and Washer ..Rearview Mirror. Inside Daymight ... . Reclining Front Seatbacks Recommended Fluids and Lubricants Remote Keyless Entry Battery Replacement...
Page 399
....Service Work. Doing Your Own Servicing Your Air Bag-Equipped Pontiac ......
Page 400
Third Gear (D) Position Tilt Steering Wheel Time. Setting the Tire Chains Tire Inspection and Rotation TireLoading Tires Alignment and Balance Buying New Changing a Hat Inflation Inspection and Rotation Spare. Compact Temperature Traction Treadwear Uniform Quality Grading Wear Indicators Wheel Replacement When It’s Time for New TopStrap...
Need help?
Do you have a question about the 1995 Trans Sport and is the answer not in the manual?
Questions and answers