Hose Routing (V6 Engine) - Pontiac TRANS AM 1977 Service Manual

383-28 1977 PONTIAC SERVICE MANUAL
- -
~p ~ p ~ ~ p p ~~p
RETURN HOSE
VERTICAL OF PUMP ASM.
RETURN PIPE.
PRESSURE HOSE
HOSES TO PUMP
@
F SERIES
POWER STEERING PIPE T O REST AGAINST
GEAR AS SHOWN
5 0 MIN. CLEAR. I N A L L
A. DO NOT BEND OR DISTORT PIPES TO
DIRECTIONS A T THIS
F A C I L I T A T E I N S T A L L A T I O N . A F T E R
TIGHTENING NUT, PIPES TO BE AGAINST GEAR
LOCATION
AS SHOWN AT "X".
POWER STEERING
B. HOSES MUST BE INSTALLED TO CLEAR EACH
PRESSURE
OTHER (VIEW "A") AND A L L SURROUNDING
PARTS MIN. CLEARANCE
5 0
EXCEPT AS
OTHERWISE NOTED. RETURN HOSE MUST NOT
BE TWISTED DURING INSTALLATION. HOSE
ENDS MUST BE KEPT FREE FROM DIRT AND
OTHER CONTAMINATES.
C. FOR LEAK REPAIR-THE TUBE NUT TO BE
LOOSENED, PlPE THEN ROTATED BACK &
FORTH, AND THEN RETIGHTENED TO A
MAXIMUM OF 40 LB. FT.
D. HOSES MUST BE INSTALLED TO MAINTAIN .40
MINIMUM FROM BATTERY & BATTERY CASE.
(SEE VlEW "C".)
RETURN HOSE
H SERIES
VIEW B
WITH 231 ENGINE
VIEW C
4651
Fig. 383-640 Hose Routing (V6 Engine)